Справочник Пользователя для Cisco Systems Linksys PAP2
Confirm Tone
This should be a brief tone to notify the
user that the last input value has been
accepted.
user that the last input value has been
accepted.
ToneScript 600@-
16;1(.25/.25/1)"
SIT1 Tone
An alternative to <Reorder Tone> played
when an error occurs while making an
outbound call. The RSC to trigger this tone
is configurable (see Section ???)
when an error occurs while making an
outbound call. The RSC to trigger this tone
is configurable (see Section ???)
ToneScript 985@-16,1428@-
16,1777@-
16;20(.380/0/1,.380
/0/2,.380/0/3,0/4/0)
16;20(.380/0/1,.380
/0/2,.380/0/3,0/4/0)
SIT2 Tone
See <SIT1 Tone>
ToneScript
914@-16,1371@-
16,1777@-
16;20(.274/0/1,.274
/0/2,.380/0/3,0/4/0)
16,1777@-
16;20(.274/0/1,.274
/0/2,.380/0/3,0/4/0)
SIT3 Tone
See <SIT1 Tone>
ToneScript
914@-16,1371@-
16,1777@-
16;20(.380/0/1,.380
/0/2,.380/0/3,0/4/0)
16,1777@-
16;20(.380/0/1,.380
/0/2,.380/0/3,0/4/0)
SIT4 Tone
See <SIT 1 Tone>
ToneScript
985@-16,1371@-
16,1777@-
16;20(.380/0/1,.274
/0/2,.380/0/3,0/4/0)
16,1777@-
16;20(.380/0/1,.274
/0/2,.380/0/3,0/4/0)
MWI Dial Tone
1
This tone is played instead of <Dial Tone>
when there are unheard messages in the
subscriber’s mail box
when there are unheard messages in the
subscriber’s mail box
ToneScript 350@-19,440@-
19;2(.1/.1/1+2);10(*
/0/1+2)
/0/1+2)
Cfwd Dial Tone
Special dial tone played when call forward
all is activated
all is activated
ToneScript 350@-19,440@-
19;2(.2/.2/1+2);10(*
/0/1+2)
/0/1+2)
Holding Tone
Indicate to the local user that the far end
has placed the call on hold
has placed the call on hold
ToneScript 600@-
16;*(.1/.1/1,.1/.1/1,.
1/9.5/1)
1/9.5/1)
Conference Tone
Plays to all parties when a 3-way
conference is in progress
conference is in progress
ToneScript 350@-
16;30(.1/.1/1,.1/9.7/
1)
1)
Secure Call
Indication Tone
Indication Tone
This tone is played when a call is
successfully switched to secure mode. It
should be played only for a short while (<
30s) and at a reduced level (< -19 dBm) so
that it will not interfere with the
conversation.
successfully switched to secure mode. It
should be played only for a short while (<
30s) and at a reduced level (< -19 dBm) so
that it will not interfere with the
conversation.
ToneScript 397@-19,507@-
19;15(0/2/0,.2/.1/1,.
1/2.1/2)
1/2.1/2)
Notes:
1. Reorder Tone is played automatically when <Dial Tone> or any of its alternatives times out
2. Off Hook Warning Tone (also called Howler Tone) is played when Reorder Tone times out
4.10. Less Frequently Used Paramters
4.10.1.
Advanced Protocol Parameters
Parameter Name
Description
Type
Default
SIP Parameters
Max Forward
SIP Max-Forward value. Range: 1 – 255
Uns8
70
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
70