Справочник Пользователя для Kenwood TM-G707
![Kenwood](https://files.manualsbrain.com/attachments/ac42daf651911f04136b4d8c05616678159c5c55/common/fit/150/50/30f9cfad5dc0dc630b5170bf40a934a632113bd8a7d6531073899a1c1c4c/brand_logo.png)
26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
REVERSE FUNCTION
After setting a separate receive and transmit frequency,
you can exchange these frequencies using the Reverse
function. While using a repeater, this function allows you
to check the signal strength of a station accessing the
repeater. If the station’s signal is strong, move to a
simplex frequency to continue the contact and free up
the repeater.
you can exchange these frequencies using the Reverse
function. While using a repeater, this function allows you
to check the signal strength of a station accessing the
repeater. If the station’s signal is strong, move to a
simplex frequency to continue the contact and free up
the repeater.
Press [REV] to switch the Reverse function ON
(or OFF).
(or OFF).
• “R” appears when the function is ON.
Note:
◆
If pressing
[REV]
places the transmit frequency outside the allowable
transmit frequency range, then pressing Mic
[PTT]
causes an error
beep to sound; transmission is inhibited.
◆
If pressing
[REV]
places the receive frequency outside the receive
frequency range, an error beep sounds and no reversal occurs.
◆
Automatic Repeater Offset does not function while Reverse is ON.
◆
You cannot switch Reverse ON or OFF while transmitting.