Справочник Пользователя для Kenwood TK-3130
7
1
Plug the AC adapter cable into
the adapter jack located on the
rear of the charger.
the adapter jack located on the
rear of the charger.
2
Plug the AC adapter into an AC
outlet.
outlet.
3
Slide a battery pack using the
supplied holder or a transceiver
equipped with a battery pack
into the battery pack slot.
supplied holder or a transceiver
equipped with a battery pack
into the battery pack slot.
•
Make sure the metal contacts of
the battery pack mate securely
with the charger terminals.
the battery pack mate securely
with the charger terminals.
•
The indicator lights red and
charging starts.
charging starts.
4
When charging is completed,
the indicator lights green.
Remove the battery pack or the
tran-sceiver from the battery
pack slot.
the indicator lights green.
Remove the battery pack or the
tran-sceiver from the battery
pack slot.
•
It takes approximately 2.5 hours
to charge the battery pack.
to charge the battery pack.
•
When the charger will not be
used for a long time, unplug the
AC adapter from the AC outlet.
used for a long time, unplug the
AC adapter from the AC outlet.
•
When charging a second
battery pack, wait for
approximately 10 seconds after
removing the first battery pack
from the charger. If the LED
blinks red after installing the
second battery pack, remove
the battery pack and wait for a
few seconds before inserting it
again.
battery pack, wait for
approximately 10 seconds after
removing the first battery pack
from the charger. If the LED
blinks red after installing the
second battery pack, remove
the battery pack and wait for a
few seconds before inserting it
again.