Справочник Пользователя для Motorola EX600XLS
50
English
PH
ON
E
MAKING A PHONE CALL
D
THROUGH A CONVENTIONAL
SYSTEM
SYSTEM
To initiate a phone call:
Press the preprogrammed Phone button, and
skip to step 5.
skip to step 5.
–or–
Press the PTT button, and if the Hot keypad
feature has been programmed by your dealer,
do the following:
feature has been programmed by your dealer,
do the following:
D
appears on the LCD when you are in
Phone mode.
5
Press and Release the PTT button.
•
If phone access is successful, a dial tone
sounds.
sounds.
•
If phone access is unsuccessful, a low-
pitched alternating tone sounds. Discon-
nect the call (see step 8) and try again.
pitched alternating tone sounds. Discon-
nect the call (see step 8) and try again.
6
Enter the phone number with the keypad. The
number is automatically sent without pressing
the PTT button again.
–or–
number is automatically sent without pressing
the PTT button again.
–or–
+
or
?
to
select a number from
the phone list.
the phone list.
Press and release the PTT button again to
send the number.
send the number.
7
Hold the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press the PTT button to talk;
release it to listen.
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press the PTT button to talk;
release it to listen.
XXX
-
XXX
-
XXXX
8
To disconnect the phone call:
Press and hold
Press and hold
(
to exit Phone.
D
no longer appears on the LCD.
1
Select a conventional zone and channel that
have been programmed for telephone.
have been programmed for telephone.
2
)
to enter menu mode.
3
+
or
?
until
4
)
to select
Phone
Phone
08_Phone.fm Page 50 Tuesday, September 24, 2002 10:22 AM