Справочник Пользователя для Golden Technologies Companion
18
Companion
4. REMOVING THE SEAT POST
NOTE: This step may not be necessary.
We provide instructions in case
you do find it necessary to re-
move the seat post for storage
or for replacement.
you do find it necessary to re-
move the seat post for storage
or for replacement.
1. Remove the nut, bolt, and washer. See
Figure 16.
2. Pull the seat post up and out of the seat
post pedestal.
DISASSEMBLY
FIGURE 16. REMOVING THE SEAT POST
5. REMOVING THE BATTERIES
1. Pull Battery plugs apart
2. Remove the batteries one at a time.
1. Pull Battery plugs apart
2. Remove the batteries one at a time.
6. DISCONNECTING THE MAIN HAR-
NESS CONNECTOR
1. Squeeze the locking ear on the connec-
tor. See figure 18.
2. Disconnect the main harness connector
from the electrical enclosure. See figure
17.
17.
FIGURE 17. BATTERY DISCONNECTION
FIGURE 18. LOCKING EAR DETAIL
SEAT POST
PEDESTAL
REMOVE THIS
BOLT, NUT, AND
WASHERS
BOLT, NUT, AND
WASHERS
BATTERY
CHARGER CONNECTORS
MOTOR/BRAKE
CONNECTORS
CONNECTORS
MAIN HARNESS
CONNECTORS
CONNECTORS
BATTERY CABLE CONNECTORS
TAIL LIGHT
CONNECTORS
CONNECTORS
LOCKING EAR:
MAIN HARNESS
CONNECTOR
MAIN HARNESS
CONNECTOR
Companion Owner's Manual: GC222, GC223, GC322, GC323, GC325, GC421