Справочник Пользователя для Sony PDW-1500

Скачать
Страница из 132
C
h
a
p
te
r 8  
 M
e
nu
s
106
8-4 Maintenance Menu
8-4 Maintenance Menu
8-4-1 Items in the Maintenance Menu
The maintenance menu includes the following items.
In the table, the underscored items are the factory default 
settings.
For details about DRIVE MAINTENANCE, CHECK and 
SERVICE SUPPORT, refer to the Maintenance Manual.
AUDIO CONFIG: items relating to audio control
Item
Setting
METER HEAD ROOM
Select the audio reference level (headroom).
–12dB,–16dB, –18dB, –20dB (525(U)/525(J)-line modes)
–12dB, –16dB, –18dB, –20dB, EBUL (625-line mode)
DATA LENGTH
When  “IMX50,” “IMX40,” or “IMX30” is selected in setup menu item 031, this selects the 
audio quantization bit count and number of recording channels.
: 16 bits 
× 8 channels
24
×4: 24 bits × 4 channels
Note
When item 031 is set to “DVCAM,” the setting is automatically fixed at 16 bits 
× 4 channels.
NON-AUDIO INPUT
Select whether to handle digital audio signals as non-audio signals during recording.
Sub-item
1
tr1/tr2
audio: Handle as audio signals.
data: Handle as non-audio signals.
2
tr3/tr4
3
tr5/tr6
4
tr7/tr8
INPUT LEVEL
Set the upper limit for the signal level input to audio channels 1/3 or 2/4.
+4dB, 0dB, –3dB, –6dB (525(U)/525(J)-line modes)
+4dB, 0dB, –3dB, –6dB, EBUL (625-line mode)
Sub-item
1
CH1/CH3
2
CH2/CH4
OUTPUT LEVEL
Set the reference level for audio output signals.
+4dB, 0dB, –3dB, –6dB (525(U)/525(J)-line modes)
+4dB, 0dB, –3dB, –6dB, EBUL (625-line mode)
NETWORK CONFIG: items relating to network settings
Item
Setting
DHCP
Set whether to assign an IP address automatically with the DHCP server.
DISABLE: Do not assign automatically.
ENABLE: Assign automatically.
IP ADDRESS PRESET
Set IP address.
192.168.001.010
Note
When DHCP is set to “ENABLE,” it is not possible to set the IP address.
SUBNET MASK PRESET
Set the subnet mask.
255.255.255.000
Note
When DHCP is set to “ENABLE,” it is not possible to set the subnet mask.
DEFAULT GATEWAY PRESET
Set the default gateway.
000.000.000.000
Note
When DHCP is set to “ENABLE,” it is not possible to set the default gateway.
16
×8