Справочник Пользователя для Sony PDW-1500

Cha

p

te

r 4  

 Rec

o

rd

ing/

Pl

a

y

bac

k

55

4-2 Playback

This section describes playback of video and audio.

Although this unit uses optical discs, it is designed to offer 
the most convenient features of tape playback by VTRs. 
One of these is the playback start position, which works in 
the same way as tape, as described below.

After playback stop
The unit stops at the position where the STOP button was 
pressed.
Press the PLAY button to resume playback at the stop 
position.

After recording
The unit stops at the position where recording ended.
To play back a clip, press the PREV button to move to the 
start frame of any clip, or press the PREV button with the 
PLAY button held down to move to any position.

After disc insertion
The unit stops at the position of the disc when it was most 
recently ejected.
Press the PLAY button to resume playback at the most 
recent position.
The playback position is saved to the disc when the disc is 
ejected, which allows playback to start at that position 
whenever it is loaded into any XDCAM player.

This function is not available when the write-protect tab of 
the disc is set to the recording disabled position, and when 
extended menu item 310 “REC INHIBIT” is set to “on.”
The REC INH indicator may light when neither of the 
above are true if the format of recorded sections on the disc 
is not the same as the recording settings of this unit. In this 
case, the playback position can be saved to the disc.

Before beginning playback, make any necessary button/
switch settings.