Справочник Пользователя для Maxon Telecom WL7-VERS. C-1K
PATENTS PENDING
27
11921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
INSIDE
OF
DOOR
2. Center the template inside wheelchair door-
way (FIG. 27-1). Line up the outboard
edge of template parallel with inboard edge
of doorway. Maintain center and the clear-
ance dimension shown.
edge of template parallel with inboard edge
of doorway. Maintain center and the clear-
ance dimension shown.
BASE PLATE TEMPLATE CLEARANCE FROM WHEEL-
CHAIR DOOR (TOP VIEW, SIDE DOOR SHOWN)
FIG. 27-1
CENTER
3.75”
VEHICLE BODY
(CUTAWAY)
BASE PLATE TEMPLATE
HOLE PATTERN
1
2
3
4
9
BACK
FRONT
5
6
7
8
10
CAUTION
For vehicles with 48” fl oor height:
If the front edge of Lift base plate is moved more than 3.75” (5” from outside of
body, as shown in FIG. 11-1) away from the inside of the wheelchair door, lower
Lift arms can hit vehicle body before platform reaches the ground. See the
vehicle fl oor levels plotted in FIG. 11-1 and maintain the clearance for the fl oor
level that applies to your Lift installation.
If the front edge of Lift base plate is moved more than 3.75” (5” from outside of
body, as shown in FIG. 11-1) away from the inside of the wheelchair door, lower
Lift arms can hit vehicle body before platform reaches the ground. See the
vehicle fl oor levels plotted in FIG. 11-1 and maintain the clearance for the fl oor
level that applies to your Lift installation.