Справочник Пользователя для SonicWALL 5.8.1
User Management
1090
SonicOS 5.8.1 Administrator Guide
Advanced LDAP Configuration
If you selected Use LDAP to retrieve user group information on the Users tab in step
you must configure your LDAP settings. To configure LDAP settings, perform the following
steps:
steps:
Step 1
On the Users tab in the SSO Configure window, click the Configure button next to the Use
LDAP to retrieve user group information option.
LDAP to retrieve user group information option.
Step 2
The Settings tab displays. In the Name or IP address field, enter the name or IP address of
your LDAP server.
your LDAP server.
Step 3
In the Port Number field, enter the port number of your LDAP server. The default LDAP ports
are:
are:
•
Default LDAP port – 389
•
Default LDAP over TLS port – 636
Step 4
In the Server timeout (seconds) field, enter a number of seconds the SonicWALL security
appliance will wait for a response from the LDAP server before the attempt times out. Allowable
values are 1 to 99999. The default is 10 seconds.
appliance will wait for a response from the LDAP server before the attempt times out. Allowable
values are 1 to 99999. The default is 10 seconds.
Step 5
In the Overall operation timeout (minutes) field, enter a number of minutes the SonicWALL
security appliance will spend on any automatic operation before timing out. Allowable values
are 1 to 99999. The default is 5 minutes.
security appliance will spend on any automatic operation before timing out. Allowable values
are 1 to 99999. The default is 5 minutes.
Step 6
Select the Anonymous login radio button to log in anonymously. Some LDAP servers allow
for the tree to be accessed anonymously. If your server supports this (MS AD generally does
not), you may select this option.
for the tree to be accessed anonymously. If your server supports this (MS AD generally does
not), you may select this option.
Select Give login name / location in tree to access the tree with the login name.