Справочник Пользователя для SonicWALL 5.8.1

Click on the Edit 

 icon in the Configure column for the Interface of the expansion module 

you want to configure. The Edit Interface window is displayed.

If you’re configuring an Unassigned Interface, you can select any zone from the Zone menu. 
LAN is already selected in the Zone menu.

Select one of the following LAN Network Addressing Modes from the IP Assignment menu. 

Static - configures the interface for a network that uses static IP addresses.

Transparent - configures the interface to use interfaces as the top level of the management 
hierarchy and span multiple interfaces. 

Depending on the option you choose from the IP Assignment menu, complete the 
corresponding fields that are displayed after selecting the option.

Assign the IP address and subnet mask for the network mask assigned to the subnet.These are 
auto-filled for you, but you can change them if desired. 

If you want to enable remote management of the SonicWALL security appliance from this 
interface, select the supported management protocol(s): HTTP, HTTPS, SSH, Ping, SNMP, 
and/or SSH. You can also select HTTP for management traffic. However, bear in mind that 
HTTP traffic is less secure than HTTPS. You can also use a checkbox to add a rule to redirect 
from HTTP to HTTPS to enforce security on the interface.

Click OK to configure the interface.