Справочник Пользователя для SonicWALL 5.8.1

In the following section you will group and deploy your new VAPs, associating them with the 
internal wireless radio. Users will not be able to access your VAPs until you complete this 
process:

In this section, you will group multiple VAPs into a single group to be associated with your 
SoncPoint(s).

In the left-hand menu, navigate to the Wirelesst > Virtual Access Point page.

Click the Add Group... button in the Virtual Access Point Group section.

Enter a Virtual AP Group Name.

Select the desired VAPs from the list and click the -> button to add them to the group. 
Optionally, click the Add All button to add all VAPs to a single group.

Press the OK button to save changes and create the group.

To setup 802.11g WEP or 802.11a WEP/WPA encryption, or to enable MAC address filtering, 
use the 802.11g and 802.11a tabs. If any of your VAPs use encryption, you must configure 
these settings before your wireless VAPs will function.

Click the OK button to save changes and create this Wireless Provisioning Profile.

After your VAPs are configured and added to a VAP group, that group must be specified in the 
Wireless > Settings page in order for the VAPs to be available through your internal wireless 
radio.

In the left-hand menu, navigate to the Wireless > Settings page.

In the Wireless Virtual Access Point section, select the VAP group you created in 

 from the Virtual Access Point Group drop-down list. In this case, we 

choose the default Internal AP Group as our Virtual AP Group.

Click the Accept button to continue and associate this VAP group with your internal wireless 
radio.

If you are setting up guest services for the first time, be sure to make necessary 
configurations in the Users > Guest Services pages.