Справочник Пользователя для SonicWALL 5.8.1
SonicPoint > Virtual Access Point
572
SonicOS 5.8.1 Administrator Guide
Configuring a VAP for Corporate LAN Access
You can use a Corporate LAN VAP for a set of users who are commonly in the office, and to
whom should be given full access to all network resources, providing that the connection is
authenticated and secure. These users would already belong to the network’s Directory
Service, Microsoft Active Directory, which provides an EAP interface through IAS – Internet
Authentication Services. This section contains the following subsection:
whom should be given full access to all network resources, providing that the connection is
authenticated and secure. These users would already belong to the network’s Directory
Service, Microsoft Active Directory, which provides an EAP interface through IAS – Internet
Authentication Services. This section contains the following subsection:
•
•
•
•
Configuring a Zone
In this section you will create and configure a new corporate wireless zone with SonicWALL
UTM security services and enhanced WiFiSec/WPA2 wireless security.
UTM security services and enhanced WiFiSec/WPA2 wireless security.
Step 1
Log into the management interface of your SonicWALL UTM appliance.
Step 2
In the left-hand menu, navigate to the Network > Zones page.
Step 3
Click the Add... button to add a new zone.
General Settings Tab
Step 1
In the General tab, enter a friendly name such as “VAP-Corporate” in the Name field.
Step 2
Select Wireless from the Security Type drop-down menu.
Step 3
Select the Allow Interface Trust checkbox to allow communication between corporate
wireless users.
wireless users.
Step 4
Select checkboxes for all of the security services you would normally apply to wired corporate
LAN users.
LAN users.