Справочник Пользователя для RCA DTA800B1
Step 2: Connections
Box contents
The following items are included:
Setting up
Step 1: Installation
The Converter Box can be installed either horizontally or vertically. The left side of the
Converter Box can be rotated as a stand for vertical installation.
RCA Digital TV Converter Box
Remote control
User Manual
(this booklet)
Quick Start
Guide
RF coaxial cable
Horizontal installation
Vertical installation (recommended)
Bottom view
4
DTA800B1_IB_EN_E_V3
+
-
+
-
2 AAA Batteries
CH4
OUTPUT
TO TV
SMART ANTENNA IN
ANTENNA IN
AC~120V
CH3
R
AUDIO
L
TV
ANTENNA
VIDEO
Connect your existing antenna cable to the ANTENNA IN jack
of the Converter Box.
Connect the RF coaxial cable (supplied) from the OUTPUT TO
TV jack of the Converter Box to the ANTENNA jack of the TV
set.
Slide the CH3/CH4 selector on the back of the Converter Box to
the channel that is not in use in your area. The Converter Box
will send its video signal to either Channel 3 or 4 on your TV.
Connect the Audio/Video cables (not supplied) from the Audio
/Video OUT jacks (yellow, white, red) of the Converter Box to
the Audio/Video IN jacks on the TV set. If there are more than
two sets of Audio/Video jacks on the TV set, connect only either
INPUT1 or INPUT2 to those of your converter box.
1
4
5
3
From antenna
AC120V
1
2
3
4
AUDIO IN
L R
VIDEO IN
(Optional)
Tip: Using the optional Audio/Video cable
connection provides better picture quality
in case your TV set has Audio/Video input available.
Connect the AC power cable of the Converter Box to a
suitable wall outlet.
5
2
Option 1: Basic connection to TV
Note: You may choose to connect the RF coaxial
cable to TV, or Audio/Video cables to TV,
or both the RF coaxial cable and AV cables to TV.
60Hz