Справочник Пользователя для Extron electronic DSC 3G-HD A

Device Info screen

 

Auto-Image

When Auto-Image is performed, the DSC attempts to size and position the image to fill 
the display screen (fill mode) or use the native aspect ratio of the input (follow mode). 
Using SIS commands or the OSD submenus, you can perform a one-time Auto-Image on 
the current input.
Only the horizontal and vertical positioning and the horizontal and vertical size are 
adjusted by the Auto-Image. All other controls are left unchanged. 

• 

If the aspect ratio has been set to Fill, the H and V position returns to 0,0, and the H 
and V Size is set to match the current output rate. 

• 

If the aspect ratio has been set to Follow, the H and V position and size are set to 
maintain the native aspect ratio of the input rate with respect to the current output 
resolution. 

Auto-Image is useful in applications in which a variety of new input sources may be 
encountered (such as when a matrix switcher is connected). It is also useful for centering 
and sizing an image that has been adjusted out of default settings.
You can perform a one-time Auto-Image by the following methods:

• 

Front panel: While the OSD is not displayed, press the Auto-Image () button twice. 
(The first press displays the message 

Press

 

Auto

 to 

Confirm

 on the OSD. The 

second press initiates the Auto-Image.)

• 

OSD submenus: Select the 

Auto-Image

 / 

Press

 

Enter

 

to

 

Auto-Image

 option from 

• 

SIS commands (see the 

 on page 49).