Справочник Пользователя для ICP DAS USA 7000
7000 Bus Converter User Manual (version 1.2,Feb/2003, 7PH-006-10) --------------- 60
3.3.4 Verifying the Installation:
This section will guide you on how to verify if the I-7563 was properly
installed. You will also need to determine the COM port assignment made
by Windows for the USB to 3 Ports RS-485 Hub.
This section will guide you on how to verify if the I-7563 was properly
installed. You will also need to determine the COM port assignment made
by Windows for the USB to 3 Ports RS-485 Hub.
Note:
Before you plug in the I-7563 for the first time, make sure that you
do not attach any serial device first to the converter. You must only plug in
the I-7560 itself.
the I-7560 itself.
To verify if the device is properly installed and determine the COM port
assignment of the device:
1. Click
assignment of the device:
1. Click
Start _ __ _ Control Panel _ __ _ System
. Inside System
Properties, click on
Device Manager
. Double-click on Ports (COM &
LPT1). You should see the I-7563 USB-to-3 Ports RS485 Hub (COM3)
device listing. This also means that Windows has assigned the device
to COM3 port.
device listing. This also means that Windows has assigned the device
to COM3 port.