Справочник Пользователя для Black Box IC026AE-R2

↔IEEE 488 INTERFACE CONVERTER

To maintain safety, emission, and immunity standards of this declaration, 
the following conditions must be met.

• Serial and IEEE cables must have a braided shield connected

circumferentially to their connectors’ metal shells.

• All cable screw locks must be tightened at both ends of the cable. 

• The host computer must be properly grounded.

• Some inaccuracy is to be expected when I/O leads are exposed 

to RF fields or transients.

• The operator must observe all safety cautions and operating conditions

specified in the documentation for all hardware used.

• The host computer, peripheral equipment, power sources, and expansion

hardware must be CE compliant.

• All power must be off to the device and externally connected equipment

before internal access to the device is permitted.

• An external power supply is provided with this product. Its input is 105 

to 125 VAC or 210 to 250 VAC, 50-60 Hz, 10 VA maximum power draw. 
Its 9-VDC output connects to the power input of the unit (marked 10VDC
MAX @ 500 mA).

• The RS-232/422 terminal is meant to be connected only to devices with

serial-communications-level signals. The IEEE 488 terminal is meant to be
used only with non-isolated IEEE 488 systems. The common mode voltage
(cable shell to earth) must be zero.

• Terminal Installation Category for CE Compliance is Category 1.

• Operating environment for CE compliance is: Indoor use at altitudes

below 2000 m, 0 to 40°C, 80% maximum RH up to 31°C decreasing
linearly 4%RH/°C to 40°C.

• Regarding DC power input: Please note that the power input is marked

10VDC MAX @ 600 mA. This is just something to check; check your
equipment’s power input labels for “600 mA” (or even 500 mA).