Справочник Пользователя для Nortel Networks PO937240 02

Chapter 4 Time-saving features

Telephone Features Programming Guide

Press 

≤fi to redial the last external number you dialed.

Last Number Redial records a maximum of 24 digits.

Last Number Redial can be restricted at individual telephones.

You need to start a Unified Manager session to program this feature. For more information about 
programming using Unified Manager, see the Business Communications Manager Programming 
Operations Guide. 

Business Communications Manager provides two types of speed dialing:

•

system 

•

personal

System Speed Dial programming allows you to assign two-digit speed dial codes to the external 
numbers called most often. Personal Speed Dial programming allows users to program their own 
speed dial numbers.

Speed dial numbers are subject to the same restriction filters as normally dialed numbers. Your 
installer can program system speed dial numbers to bypass dialing restrictions.

To make a speed dial call

Press

≤‚ to quickly dial external telephone numbers that programmed to speed dial codes.

If you have a Last Number Redial button programmed, use Button Inquiry 

(

≤•‚), then press the Last Number Redial button followed by (£) to 

check the last number before you dial it.

The last number you dialed was a speed dial number that 
displayed a name instead of the number. The number dials 
correctly, but does not appear on the display.

You have not dialed an external telephone number since the last 
power interruption or system reset.

You can copy a number on an autodial button using Last Number Redial.

Hidden number

No last number