Справочник ПользователяСодержаниеMeridian 9417CW Important Tips2Introduction 13Key Descriptions 23The Setup and Options lists 33Basic Installation 43Basic Features 73Directory 153Callers List 193Memory keys 223Advanced Features 273Display messages and lights 364General display messages 374Troubleshooting 404Index4Introduction5Key Descriptions6The Setup and Options lists7Basic Installation8Connecting the handset cord8Connecting the power adaptor8Connecting the Line Cord when... ...lines 1 and 2 are on the same line cord8Connecting an optional fax machine or modem9Checking your telephone10Desk Mounting10Optional Wall Mounting10Adjusting the Display10The Set Options Key10Basic Features11Making a call111. Lift the handset or press either © or ¬.111. Enter the number using the dial pad.112. Enter the number using the dial pad.112. Lift the handset or press either ©, ¶ or ¬.11Answering a call111. Lift the handset, press © or press the key for the line you want to answer.11Putting a call on hold111. Make or answer a call.112. Press . The display shows that the call is on hold on line x and the line indicator light fla...113. To retrieve the call, press ¬. If you don’t retrieve the call within 15 minutes, the call is a...11Switching between two lines121. Make or answer a call on one line.122. To make or answer a second call on the other line, press the second line key. This automatical...123. To hold one line automatically and speak on the other, press the line keys alternately.124. To end a call which is not on hold, press ® or hang up.12Making a Conference call121. Make or answer a call on one of the lines.122. Make or answer a call on the second line.123. Once you have callers on both lines, press ç.12Extension in Use12Making a Handsfree call121. Press © or ¬.121. Lift the handset.122. Enter the number using the dial pad.122. Dial a number using the dial pad.123. When the call is over, press ®.123. When the call is answered, press ©.124. Hang up the handset.125. When the call is over, press ®.12Putting a call on mute131. Press ©.132. Without lifting the handset, make a call.133. To turn off the microphone, press ©. You can hear your caller but your caller cannot hear you....134. To speak to your caller, press © again. Each time you press ©, you turn the microphone on or off.135. When the call is over, press ®.13Using the Redial List131. Press µ. The display shows the last number you dialed.132. Find the number you wish to call by pressing ª.133. When the number is displayed, lift the handset or press either ©, ¶, or ¬.131. Press µ.132. Press · twice. The entire Redial List is deleted.13Call Waiting Identification14Super Call Waiting Identification†14SuperFlash15Turning the display of Call Waiting Identification on or off161. Press the Set Options key.162. Press • to enter the Options list.163. Use ª to scroll to number 8 or press °.164. Press °.165. Press ¬.166. Press • to turn the Call Waiting Identification feature on or press £ to turn the feature off.16Changing the display language161. Press the Set Options key.162. Press £ to enter the Setup List.163. Press ‚ or –.164. Press ‚ to select the language indicated.165. Use – to scroll to the desired language.166. Press • to select the displayed language.167. Press ®.16Setting the date and time171. Press the Set Options key.172. Press • to enter the Options List.173. Press – or ‚.174. Press ‚ and follow the instructions on the display.175. Press ®.17Turning the ringer on and off171. Press Ã.171. Press Ã.172. Press ¬.172. Press ¬.173. Press the right side of Ã. Continue pressing the right hand side until you reach the desired r...173. Press the left side of Ã. Continue pressing the left hand side until the ringer is off.174. Press ß.174. Press ß. Ringer is OFF and the line affected appear on the display.17Setting the ring tone and ringer volume181. Make sure that the ringer is turned on.182. Press the Set Options key.183. Press • to enter the Options List.184. Use ª to scroll to number 1 or press ⁄.185. Press ⁄ and follow the instructions on the display. When picking the ring tone, press à to adj...186. Press ß to end only when you are satisfied with ring tone and ringer volume.187. Press ®.18Controlling the ringer volume18Controlling the handset volume18Controlling the speaker volume18Changing the prime line181. Press the Set Options key.182. Press £ to enter the Setup List.183. Use ª to scroll to number 5 or press fi.184. Press fi to select the prime line.185. Press ®.18Directory19Saving numbers and names to the Directory191. Press ß.191. Ensure that a number is on the display. (For example, access the Redial List, the Callers List...192. Press ¢.192. Press ß.193. Enter the number using the dial pad.193. Press ¢. If the name is displayed with the number, both are now saved in the Directory.194. Press ß. Only the number is stored at this point.194. If no name is displayed, you are prompted to enter one. If you do not want a name, go to step ...195. If you do not want a name, go to step 6. To enter a name, use the dial pad. (See Entering Name...195. Press ß.196. Press ß.19Saving an active call into the Directory191. Answer or make a call.192. Press ß.193. Press ¢. If the name was displayed with the number, both are now saved in the Directory.194. If no name is displayed, you are prompted to enter one. If you do not want to enter a name, go...195. Press ß.196. Press ®.19Saving a memory key entry to the Directory201. Press the desired memory key. Ensure the live dial pad option is turned off.202. Press ß.203. Press ¢. If the name was displayed with the number, both are now saved in the Directory.204. If no name is saved, you are prompted to enter one. If you do not want to enter a name, go to ...205. Press ß.206. Press ®.20Entering Names20Making a call from the Directory201. Press ¢.202. Press – or or use the dial pad to find the item you want to dial out.203. Lift the handset or press either ©, ¶, or ¬.204. To end the call, press ® or hang up.20Finding items in the Directory211. To see the Directory List heading, press ¢.212. To see the listings that start with a particular letter, press the appropriate dial pad key. T...213. To leave the Directory at any time, press ¢ or ®. Note: If you’re on a call while you’re viewi...21Editing in the Directory211. Press ¢.212. Press – or to find the item you want to edit.213. To begin editing, press “.214. If you do not want to change the number, go to step 5. To backspace and erase digits, press “....215. Press ß.216. If you do not want to change the name, go to step 7. To change or add to the name, use “ and t...217. Press ß.218. Press ®.21Deleting items from the Directory221. Press ¢.222. Press ª to find the item you want to delete.223. Press · twice. You are still in the Directory.224. Press ® or ¢ to exit the Directory at any time.221. Press ¢.222. Press ·.223. Press · again to confirm deletion of the entire Directory.224. Press ®.22Callers List23Using the Callers List23Setting up the Callers List231. Press the Set Options key.232. Press the • to enter the Options List.233. Press – four times or press ›.234. Press › to change the Callers List.235. Press ¬.236. Press – to select Unanswered, All calls, or No calls.237. Press •. Repeat steps 4 through 7 for the other line.23Setting the List Mode231. Press the Set Options key.232. Press • to enter the Options List.233. Use ª to scroll to number 5 or press fi.234. Press • if you want to see the calls for both lines at the same time. Press £ if you want to s...23Finding an item in the Callers List241. To see the Callers List heading, press Å.242. Press ¬. Note: This step is not necessary if the Callers List Mode is set to the combined opti...243. To see the first new caller in the list, press –. To move down and up the list, press ª. If yo...244. To leave the Callers List at any time, press Å or ®. Note: If you’re on a call while viewing t...24Making a call from the Callers List241. Press Å.242. Press ¬. Note: This step is not necessary if the Callers List Mode is set to the combined opti...243. Find the item you want to dial out.244. Lift the handset or press either ©, ¶, or ¬.245. To end the call, press ® or hang up.24Editing in the Callers List251. Press Å.252. Press ¬. Note: This step is not necessary if the Callers List Mode is set to the combined opti...253. Find the item you want to edit.254. Press any key on the dial pad to begin editing. This may be required if you have tried to dial...255. To add digits, use the dial pad. To erase one digit to the right of the cursor, press ‘. To er...256. To dial the edited number, lift the handset or press either ©, ¶, or ¬.251. Press Å.252. Use ª to find the item you want to edit.253. Using the dial pad, press ⁄ and the area code if necessary.254. To dial the edited number, lift the handset or press either ©or ¶.255. If you want to save the number to the directory, press ß. See Saving numbers and names to the ...25Saving Callers List numbers to the Directory or a Memory key251. Press Å.252. Press ¬. Note: This step is not necessary if the Callers List Mode is set to the combined opti...253. Find the item you want to copy.254. Press ß.255. Press ¢ or the memory key where you want to store the number.256. If no name is displayed, you are prompted to enter one. To enter a name, use the dial pad. (Se...257. Press ß.258. To leave the Callers List at any time, press Å or ®.25Deleting from the Callers List261. Press Å.261. Press Å.262. Press ¬. Note: This step is not necessary if the Callers List Mode is set to the combined opti...262. Press ¬. Note: This step is not necessary if the Callers List Mode is set to the combined opti...263. Find the item you want to delete.263. Press · twice while the Callers header is showing to delete the entire list.264. Press · twice. You are still in the Callers List.265. To leave the Callers List at any time, press Å or ®.26Memory keys26Saving numbers and names into memory keys261. Press ß.262. Press the memory key where you want to save the number.263. Enter the number using the dial pad. You can enter a maximum of 24 digits. Note: If you requir...264. Press ß.265. To skip the name, go to step 6. To enter a name, use the dial pad. (See Entering Names on page...266. Press ß.267. Label the memory key. (See the diagram on page23.)26Saving from the display into memory keys271. Ensure that a number is on the display. (For example, access the Redial List or Callers List.)272. Press ß.273. Press the desired memory key. If the name was displayed with the number, both are now saved in...274. If no name is displayed, you are prompted to enter one. If you don’t want a name, go to step 5...275. Press ß.276. Label the memory key. (See the diagram on page23.)27Saving an active call into a memory key271. Answer or make a call.272. Press ß.273. Press the desired memory key. If the name was displayed with the number, both are now saved in...27Labeling the memory keys27Making calls from memory keys281. Lift the handset or press ©, ¬, or ¶.281. Press the memory key with the number you want to dial out.282. Press the memory key with the number you want to dial out.282. Lift the handset or press either ¶, ©, or ¬.28Editing memory keys281. To see its contents, press the memory key.282. Press “.283. If you don’t want to change the number, go to step 4. To backspace and erase digits, press “. ...284. Press ß.285. If you don’t want to change the name, go to step 6. To add letters, use the dial pad. (See Ent...286. Press ß.28Deleting memory keys281. To see its contents, press the memory key.282. To erase, press · twice.28Saving features in memory keys291. Press ß.291. Press ß.292. Press the memory key where you want to save the number.292. Press the memory key where you want to save the number.293. Enter the telephone company feature code for turning the feature on.293. Enter the telephone company feature code for turning the feature off.†294. Press ß.294. Press ß.295. Enter the feature name using the dial pad. (See Entering Names on page16.)295. Enter the feature name using the dial pad. (See Entering Names on page16.)296. Press ß.296. Press ß.297. Label the memory key.297. Label the memory key.29Using feature keys291. Press the memory key where you stored the desired feature. The display shows the feature name ...292. Lift the handset or press either ©, ¶, or ¬. The feature code is dialed out, which turns the f...29Saving a feature and light in memory keys291. Press ß.301. Press ß.302. Do NOT select a memory key yet. To program the light on, press ⁄.302. Do NOT select a memory key yet. To program the light off, press ‚.303. Press the desired memory key.303. Press the desired memory key.304. Enter the telephone company feature code for turning the feature on.304. Enter the telephone company feature code for turning the feature off.†30Read the display to confirm the number.30Read the display to confirm the number.305. Press ß.305. Press ß.306. Label the memory key. (See the diagram on page23.)306. Label the memory key. (See the diagram on page23.)30Using FeatureLight keys301. Press the memory key where you stored the FeatureLight. The display shows FeatureLight ON or F...302. Lift the handset or press either ©, ¶, or ¬. The feature and light turn on or off. (When the f...30Advanced Features31Adding a timer key311. Press the Set Options key.312. Press £ to enter the Setup List.313. Use ª to scroll to number 6 or press fl.314. Press fl to add a Timer key.315. Press a memory key.316. Press ß.317. Label the timer key. (See the diagram on page23.)318. Press ®.31Using the Call Timer311. Make or answer a call. The timer starts running automatically.312. Once on the call, press the timer key. The display shows the running time of the calls on eith...313. To return to the call information display, press the timer key again.314. When the call is over, hang up the handset or press ®. The timer stops counting.31Deleting a timer key311. Press the timer key.312. Press · twice.31Adding a page key321. Press the Set Options key.322. Press £ to enter the Setup List.323. Use ª to scroll to number 7 or press ‡.324. Press ‡ to add a page key.325. Press a memory key.326. Press ß.327. Label the page key. (See the diagram on page23.)32Using the page321. Lift the handset.322. Press the page key and speak into the handset.323. Replace the handset or press ® to end a page.32Deleting a page key331. Press ß.332. Press the page key.333. Press ‡ to begin re-programming the page key to be a memory key.334. Press ß two times to skip the number and name prompts. The page key has been changed to a memo...335. Press the page key.336. Press · twice.33Installing the page lines33Selecting the dial pad mode341. Press the Set Options key.342. Press • to enter the Option List.343. Use ª to scroll to number 2 or press ¤.344. Press ¤ to change the dial pad mode.345. Press ®.34Entering area codes341. Press the Set Options key.342. Press £ to enter the Setup List.343. Use ª to scroll to number 3 or press ‹.344. Press ‹.345. Enter the area code or prefix using the dialpad and press ß. Repeat this steps 4 and 5 for eac...341. Press the Set Options key.342. Press £ to enter the Setup List.343. Use ª to scroll to number 3 or press ‹ to go directly to the item.344. Press ‹. The first area code is displayed. If this is the number you want to delete or change,...345. Press ß until you see the number you want to change or delete.346. Press “ to backspace and delete, or change the area code or prefix.347. Press ß.348. Press ®.34Entering Dialing Restrictions351. Press the Set Options key.352. Press £ to enter the Setup List.353. Use ª to scroll to number 2 or press ¤.354. Press ¤.355. Enter the digits you want restricted and press ß. Repeat this step for each dialing restrictio...356. Press ®.351. Press the Set Options key.352. Press £ to enter the Setup List.353. Use ª to scroll to number 2 or press ¤.354. Press ¤.355. Press “ to back space and delete or change restricted digits.356. Press ß. Repeat steps 5 and 6 for the restricted digits that you want to delete.357. Press ®.35The Security Numbers Feature361. Press the Set options key.362. Press £ to enter the Setup List.363. Use ª to scroll to number 8 or press °.364. Press °.365. Using the dial pad, enter the secure number.366. Press ß to end.367. Repeat steps 5 and 6 for each secure number you want to enter.368. Press ®.361. Press the Set options key.362. Press £ to enter the Setup List.363. Use ª to scroll to number 8 or press °.364. Press °.365. Press ß until you find the number you want to change or delete.366. Press “ to backspace and simply delete the secure number, or delete the secure number and use ...367. Press ß.368. Press ®.36The Fax Switch37Incoming Calls37Outgoing Calls37Setting the Fax Switch371. Press the Set Options key.372. Press • to enter the Options List.373. Use ª to scroll to number 6, or press fl.374. Press fl to enable or disable the Fax Switch.37Copying the Directory to another 9417CW telephone381. Press the Set Options key.382. Press • to enter the Options List.383. Use ª to scroll to number 7 or press ‡.384. Press ‡ to begin the Directory Transfer.385. On the 9417CW telephone you are copying the Directory from, press ø and dial the telephone num...386. The display shows: Data transfer complete when the Directory Transfer is complete. If the tran...38Using a headset381. Press the Set Options key.392. Press the £ to enter the Setup List.393. Use ª to scroll to number 1, or press ⁄.394. Press ⁄ to change the headset mode from enabled to disabled or disabled to enabled.39Selecting the answer mode391. Press the Set Options key.392. Press £ to enter the Setup List.393. Use ª to scroll to number 4 or press ›.394. Press › to change the answer mode.395. Press £ to choose the Prime line, or • to choose to answer the longest ringing line.396. Press ®.39Extension in use39Display messages and lights40The Callers List screen40Knowing when you have a message40Clear Message Waiting401. Press the Set Options key.402. Press the • to enter the Options List.403. Use ª to scroll to number 3 or press ‹.404. Press ‹ to clear message waiting.405. Select ¬.40Clear the Check Line Cord Message411. Press the Set Options key.412. Press the £ to enter the Setup List.413. Use ª to scroll to number 9 or press ·.414. Press ·.415. Select ¬.416. Press • to enable the check line cord message. Press £ to disable the check line cord message.41General display messages41Callers List display messages42Learning about the lights43Set indicator light messages43Line and Handsfree indicator light messages43Viewing multiple display and light messages43Troubleshooting44The display is in the alternate language.44The cursor doesn’t move when saving in the Directory.44There is no information on the display and the ringer volume is low.44I cannot hear a caller.44I answer the telephone and only hear the dial tone.44The power is out and the display is blank.44The display works but you can’t hear dial tone.44The telephone wobbles.44I cannot program a memory key.44Callers are not identified on the display.44The Callers List is empty.45I cannot dial a number in the Callers List.45The telephone hisses while not in use.45How do I connect my fax to work with this phone?45When the Fax switch feature is enabled, the message “Extension in use” appears for Line 2 and Lin...45The speakerphone is not working.45I have only one line connected to my phone, and I keep getting the message Check line cord.45How do I set up paging on this phone?45The light is stuck on, and the message feature on is displaying.46Live dialpad has stopped working.46The display is blank on my phone.46How do I answer Call Waiting?46I can view regular Caller ID information, so why can I not see who is calling on Call Waiting?46A47C47D47E47F47H48I48K48L48M48N48O48P48R48S48T48V49Размер: 1,1 МБСтраницы: 52Язык: EnglishПросмотреть