Справочник ПользователяСодержаниеDM-31061Ver.1.001HD/SD 6-inch LCD Monitor3DM-310632006.83Ver.1.003INTRODUCTION8SAFETY PRECAUTIONS8Concerning the monitor8( Do not subject the monitor to strong shocks or throw it around. Doing so may cause the liquid crystal to leak and/or the monitor to malfunction, rupture, generate heat and cause8( Do not use the monitor wherever there is a risk of ignition or explosions.8( Do not place the monitor inside a microwave oven, dryer or other heating appliance or inside a high-pressure vessel. Doing so may cause the monitor to generate heat, give off smo8( Inside the monitor are some high-voltage parts: since exposure to these parts may result in electric shocks or burns, refrain from disassembling, repairing or remodeling the moni8( If thunder and lightning should occur while the monitor is being used outdoors, immediately turn off its power, disconnect the power cord from the main unit or remove the battery8Concerning the power cord8( Always take hold of the molded part of the plug when disconnecting the power cord.8( Do not use force to bend the power cord or bunch it up for use. Doing so may cause a fire.8( Do not place heavy objects on top of the power cord. Doing so may damage the cord, causing a fire or electrical shock.8Concerning foreign matter8( Do not spill liquids inside the monitor or drop inflammable objects or metal parts into it. Operating the monitor under these conditions may cause a fire, electric shocks and/or8Concerning the power supply and installation9( This monitor uses DC 10V-18V as its supply voltage.9( In order to avoid trouble and malfunctioning, the use of the AD/DC adapter provided with the monitor is recommended. If any other power supply is to be used, make sure that the p9( Do not turn the power back on immediately after having turned it off. Doing so can cause malfunctioning.9( Bear in mind that the sound may be adversely affected if the same DC power supply as for a microphone, amplifier, speakers or other audio equipment is used for the monitor.9Concerning the liquid crystal9( Due to the nature of liquid crystal, some picture elements may be missing (bright spots, flashing spots, etc.) at times.9( Do not touch any liquid crystal which has leaked from the liquid crystal panel.9( Exercise care with the glass of a broken liquid crystal panel.9( The LCD panel is a high-precision component and, as such, the following care must be taken in its handling.9( Handle the liquid crystal protective panel carefully.9( When the brightness of the fluorescent tube has dropped10Concerning impact10( This is a precision instrument and, as such, subjecting it to impact may cause malfunctioning. Take special care when moving the monitor.10( Do not drop the monitor.10Concerning the installation and operation locations10( Installing the monitor in the following kinds of locations may cause malfunctioning and/or accidents.10( Take care to meet the following conditions in order to ensure that the monitor will be used properly.10CONCERNING THE DM-310611Outline of DM-310611\( 6.3-inch a-Si TFT LCD panel featured11( Input of HD-SDI, SD-SDI, composite and component signals supported11( 25 different video formats supported11( SDI IN, COMPOSITE, SDI MONITOR OUT and COMPONENT connectors provided11( Functions for adjusting brightness, contrast, chroma, filter, monochrome and gamma11( Marker display functions (FRAME, CENTER, 95%, 93%, 88%, 80%, 4:3, 13:9, 14:9, 2.35:1, 1.85:1, 1.66:1, Grating, BOX, USER)11( Setting of aspect ratio by user enabled (H_FULL, V_FULL, Actual Size (HD only), 16:9 (SD only), Blanking, Under Scan)11( Setting of front switches by user enabled (Aspect ratio selection, monochrome, blue-only and display/non-display of markers, chroma boosting function, etc.)11( Setting of remote controller by user enabled (Input signal selection, marker ON/OFF selection, mask ON/OFF selection, etc.)11( Automatic tracking of input signals possible11( Automatic 1/1.000 and 1/1.001 frame rate tracking and input signal detection functions11( Conversion of LCD frequency by frame conversion function enabled11( Selection of 5500K, 6500K or 9300K color temperature possible (even more subtle color tone and gray scale adjustments possible)11( Functions for detecting audio errors and CRC/EDH errors for input channels provided11( Time code (VITC) display11( Audio level meter with 8-channel display12( Function for customizing the audio level meters12( Functions for locking the panel switches and storing the settings12( Functions for storing settings as user data and calling such data12( Slim-line design and light weight12( DC power supply input supported (10 to 18V)12PARTS AND THEIR FUNCTIONS132.1 DM-3106 front panel view and parts132.2 DM-3106 rear panel view and parts16OPERATION193.1 Connection procedure193.2 Usage193.3 Concerning the screen displays203.3.1 Regular screen203.3.2 Menu screen233.3.3 Format selection screen243.3.4 LCD adjustment screen253.3.5 Marker setting screen263.3.6 Front switch function allocation screen273.3.7 User settings save and load screen283.3.8 Display information selection screen293.3.9 Input signal name setting screen303.3.10 Aspect ratio selection screen313.3.11 Remote controller setting screen323.3.12 Audio level meter display setting screen333.3.13 Other functions setting screen343.3.14 Reset screen363.4 Description of functions and operating procedures373.4.1 Selecting the input signals37■ When the front panel switches are used (*1)37■ When the remote controller is used (*2)373.4.2 Selecting the format383.4.3 Selecting the aspect ratio383.4.4 Setting the aspect ratio393.4.5 Selecting the monochrome display or color display393.4.6 Selecting the blue only or color display393.4.7 Displaying the markers403.4.8 Selecting the markers to be displayed403.4.9 Adjusting the box marker display position413.4.10 Adjusting the box marker size413.4.11 Adjusting the user marker display position423.4.12 Setting the marker thickness423.4.13 Adjusting the offset level of the brightness signals433.4.14 Adjusting the contrast of the brightness signals433.4.15 Adjusting the Pb (Cb) value433.4.16 Adjusting the Pr (Cr) value443.4.17 Adjusting the Pb (Cb) and Pr (Cr) values simultaneous443.4.18 Multiplying the chroma signal value by 3453.4.19 Adjusting the peaking value453.4.20 Setting peaking ON/OFF463.4.21 Adjusting the hue463.4.22 Setting the filter to ON or OFF473.4.23 Lighting the tally lamps483.4.24 Selecting the tally display method483.4.25 Selecting the channels to be displayed by the audio l483.4.26 Selecting the audio level meter display format493.4.27 Selecting color display or monochrome display for the493.4.28 Selecting the audio level meter channel layout503.4.29 Setting the audio level meter frame and information O503.4.30 Switching the audio level meter display ON/OFF513.4.31 Switching the time code display ON/OFF513.4.32 Switching the input signal ID display ON/OFF513.4.33 Switching the format display ON/OFF523.4.34 Switching the error status display ON/OFF523.4.35 Setting the mask533.4.36 Selecting the color space533.4.37 Setting Green ON/OFF543.4.38 Setting Blue ON/OFF543.4.39 Setting Red ON/OFF543.4.40 Setting H Delay ON/OFF553.4.41 Setting V Delay ON/OFF553.4.42 Allocating functions to the front panel switches553.4.43 Setting the remote controllers563.4.44 Giving names to the input signals573.4.45 Displaying the color bars when no signals are input573.4.46 Executing the NTSC setup583.4.47 Saving and calling the settings583.4.48 Returning the settings to their initial values59\( Resetting the error count \(Refer t59\( Initializing the settings of the curr59\( Initializing the settings of all the593.4.49 Selecting the color temperature603.4.50 Adjusting the G brightness603.4.51 Adjusting the B brightness613.4.52 Adjusting the R brightness613.4.53 Adjusting the G contrast613.4.54 Adjusting the B contrast623.4.55 Adjusting the R contrast623.4.56 Adjusting the G gamma623.4.57 Adjusting the B gamma633.4.58 Adjusting the R gamma633.4.59 Adjusting the output volume level633.4.60 Setting the output audio channel643.4.61 Changing the color of the markers643.4.62 Changing the color of the time code643.4.63 Changing the color of the characters653.4.64 Displaying all the settings65MAIN SPECIFICATIONS674.1 Input formats674.2 Input signal systems684.3 Display systems694.4 Headphones output format694.5 Concerning the adjustment values70( Brightness70( Contrast70( Chroma, Pb (Cb), Pr (Cr)714.6 Concerning the aspect ratios72( 4 : 372( 16 : 972( Actual Size72( Twice Size72( Blanking72( Under Scan724.7 Concerning the audio level meter734.7.1 Audio levels and cell color scheme734.7.2 Display formats and cell layout74( Display format: With the L to R cell layout74( Display format: With the OUT to IN cell layout74( Display format: With the vertical cell layout754.7.3 Audio level meter settings76( Selecting the display format76( Switching between the color display and monochrome display76( Switching the channel layout76( Turning the frame and information ON and OFF764.8 Concerning the remote controllers774.8.1 Examples of operations77( Concerning the edge operation77( Concerning the level operation774.8.2 Settings during level operations784.9 Settings when initialization is performed794.9.1 Common setting items794.9.2 Setting items by channel814.9.3 Resetting the error count and elapsed time814.10 General specifications824.11 Outline drawings83STANDARD AND OPTIONAL ACCESSORIES855.1 Standard accessories855.2 Optional accessories85MAINTENANCE AND OTHER PROCEDURES87When the monitor does not operate properly87No trouble or malfunctioning is indicated if any of the foll88( The response time, brightness and/or colors of the liquid crystal may change depending on the ambient temperature.88( Unevenness in the brightness, flicker, vertical stripes or very small indistinct spots may appear depending on what is displayed.88( Flicker may be conspicuous when the LCD display frequency is 50 Hz, 48 Hz or 47.95 Hz compared with when it is 60 Hz or 59.94 Hz.88( The display's optical characteristics (brightness, display unevenness, etc.) change depending on the operating time. They are particularly subject to change at low temperatures.88( The display colors may change at certain view angles.88( Noise may be generated on the start screen.88( After-images may occur. Avoid displaying the same patterns on the screen for prolonged periods of time.88( Due to the specifications of the monitor, some pixels may be missing (or bright spots may appear).88( When 1080i format signals are input, horizontal stripes may be conspicuous on the screen if a high level of peaking is applied while the aspect ratio is set to 16:9.88When trouble or malfunctioning occurs88( In the unlikely event that trouble or malfunctioning should occur, contact your dealer or an Astrodesign sales representative.88( If trouble should occur in the LCD panel, the user will be charged for repairs and parts replaced even within the warranty period.88Размер: 798,9 КБСтраницы: 89Язык: EnglishПросмотреть