Инструкции для Digital Security Controls Ltd. 143G4010

Содержание

• 3G4010

  1
  • 3G (HSPA) Wireless Alarm Communicator

    1
  • installation manual V4.0

    1
    • Warning: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read.

      1
  • Table of Contents

    2
    • Features

      4
    • Technical Specifications

      4
    • Ratings

      4
      • Figure 1 - Parts

        5
      • Table 1: Parts

        5
    • Parts

      5
    • Metal Casing

      5
    • 3G Antenna

      5
    • Antenna Mounting Hardware

      5
    • Anchor Screw Holes (3mm)

      5
    • Antenna Connector

      5
    • SIM Card Holder

      5
    • Status LEDs (see page 5)

      5
    • CON5 Battery Setting Jumper

      5
    • PC-Link Connector

      5
    • Tamper Switch

      5
    • Terminal Blocks

      5
    • Battery Leads

      5
    • Cable Entry

      5
    • Earth Ground Wire

      5
    • 12V/1.2Ah Battery

      5
    • 3G (HSPA) Radio Module

      5
      • Description

        6
        • 1. Unscrew the four screws securing the front panel to the cabinet. Remove the front panel.

          7
        • 2. Fit the 3G antenna [2]. Ensure the 3G antenna mounting hardware is fastened securely [3].

          7
        • 3. Attach the 3G radio module with the 3G antenna connector. Ensure that the connector is secure.

          7
        • 4. Turn on the 3G4010 and check the signal strength. 4.1 Connect the battery to the RED and BLK battery leads. 4.2 Connect the DC power source to +/- 12V terminals.

          7
        • 5. Allow the unit to power up.

          7
        • 6. Power down the 3G4010 by removing the DC power source and battery leads.

          7
        • 1. Using the cabinet, mark the four screw locations. Drill the anchor screw holes.

          7
        • 2. Using anchor screws (not provided), mount the cabinet to the wall.

          7
        • 3. Run the cables through the cable entry [13] or through the cabinet knockouts.

          7
        • 4. Complete the connections on the terminal blocks [11].

          7
        • 5. Reattach the front cover [1] securely to the cabinet.

          7
      • Simulated Landline Mode

        9
      • Panel Transmission Monitoring (PTM)

        9
      • Wireless Communications Sequence

        9
      • Inputs

        9
      • Outputs

        10
      • Activating the Outputs

        10
        • Contact ID

          10
      • Swinger Shutdown

        10
      • Hardware Default

        10
      • Low Power Radio Shutdown

        11
        • Figure 2 - Wiring Diagram

          16
        • Figure 3 - Telephone Connection

          17
        • Figure 4 - Power Supply and Supervision Wiring Diagram

          17
        • Figure 5 - Fire Alarm Control Unit and 3G Transmitter

          18
        • Figure 6 - DSC Subscribers’ Unit Fire and 3G Transmitter Mounted in the Same Room

          18
        • Figure 7 - DSC Subscribers’ Unit Fire and 3G Wireless Transmitter Mounted Remotely

          19
        • Figure 8 -Connection Details for Wireless Network Supervision Relay and Redundant Fire Alarm Transmission

          20
        • Figure 9 - Connection Details for GSM Supervision Relay, Phone Line Supervision and Redundant Fire Alarm Transmission

          21
• Limited Warranty

  24
  • 3G4010

    23
  • 6.21 dBi

    23
  • 3.76 dBi

    23
  • 3G4010

    23
  • 6.21 dBi

    23
  • 3.76 dBi

    23