Инструкции для Grizzly G0639

Содержание

• INTRODUCTION

  2
• Foreword

  2
• Contact Info

  2
• Data Sheet

  3
• Identification

  5
• SECTION 1: SAFETY

  6
• Safety Instructions for Machinery

  6
• Additional Safety Instructions for Hydraulic Log Splitters

  8
• SECTION 2: SETUP

  9
• Set-Up Safety

  9
• Items Needed for Setup

  9
• Unpacking

  9
• Inventory

  10
• Assembly

  11
• Test Run/Break-In

  15
• SECTION 3: OPERATIONS

  16
• Operation Safety

  16
• Job site Considerations

  16
• Transporting the Log Splitter

  17
• Control Valve

  17
• Splitting Logs

  18
• SECTION 4: MAINTENANCE

  19
• Cleaning

  19
• Schedule

  19
• Checking/Adding Hydraulic Fluid

  19
• Changing the Hydraulic Fluid

  20
• Sharpening the Splitting Wedge

  21
• SECTION 5: SERVICE

  22
• Troubleshooting

  22
• Hydraulic System Schematic

  23
• Hydraulic and Chassis Diagram

  24
• Parts List

  25
• Safety Label Placement & Parts List

  26
• WARRANTY AND RETURNS

  27
• • Hoist 1000 lb. Min. Capacity

  1
• • Lifting Straps 1000 lb. Min. Capacity

  2
• • Screwdrivers #2 Standard

  2
• AB. Flat Washers 8mm (Engine Mount)

  4
• AC. Lock Washers 8mm (Engine Mount)

  4
• AD. Hex Nuts M8-1.25 (Engine Mount)

  4
• AE. Lock Pin (Front Landing Leg)

  1
• AG. Flat Washer 12mm (Rear Landing Leg)

  1
• Qty AH. Lock Nut M12-1.75 (Rear Landing Leg)

  1
• A. Hydraulic Tank

  1
• AJ. Flat Washers 12mm (Frame to Tank)

  4
• C. Briggs & Stratton Engine

  1
• AK. Lock Nuts M12-1.75 (Frame to Tank)

  4
• D. Wheel & Tire

  2
• E. Briggs & Stratton Engine Manual

  1
• F. Fenders

  2
• G. Frame Tube Assembly

  1
• H. Rear Landing Leg

  1
• I. Tow Ball Receiver

  1
• J. Front Landing Leg

  1
• K. Breakaway Safety Chains with Hooks

  2
• L. Hub Caps (Wheels)

  2
• M. Flat Washers 20mm (Wheels)

  2
• N. Cotter Pins 3 X 30mm (Wheels)

  2
• O. Hex Bolts M10-1.5 X 25 (Fenders)

  6
• P. Flat Washers 10mm (Fenders)

  6
• Q. Lock Washers 10mm (Fenders)

  6
• R. Hex Nuts M10-1.5 (Fenders)

  6
• S. Seal Washers (Hydraulics)

  5
• T. O-rings 15.8 X 2.4 P16 (Hydraulics)

  2
• U. O-rings 11 X 2.4 P11.2 (Hydraulics)

  2
• V. Teflon Tape (Hydraulics)

  1
• W. Pressure Fitting (Hydraulics)

  1
• X. Hitch Pin (Rear Landing Leg)

  1
• Y. R-pin 3 X 55mm (Rear Landing Leg)

  1
• Z. Cotter Pin 2 X 10mm (Control Lever)

  1