Инструкции для Grizzly G0794

Содержание

• Included Plug Type

  5
• Number of T Slots

  4
• Number of Spindle Speeds

  12
• Phillips Head Screwdriver #2

  1
• INTRODUCTION

  3
• Foreword

  3
• Contact Info

  3
• G7943 Machine Data Sheet

  4
• G7944 Machine Data Sheet

  6
• Identification

  8
• SECTION 1: SAFETY

  9
• Safety Instructions for Machinery

  9
• Safety for Drill Presses

  11
• SECTION 2: CIRCUIT REQUIREMENTS

  12
• 110V Operation

  12
• SECTION 3: SET UP

  13
• Set Up Safety

  13
• Items Needed for Set Up

  13
• Unpacking

  13
• Inventory

  14
• Hardware Recognition Chart

  15
• Clean Up

  16
• Site Considerations

  16
• Column and Base

  17
• Table Support

  17
• Headstock

  19
• Drill Chuck & Arbor

  20
• Downfeed Handles & Belt Cover Knob

  21
• Table

  21
• Light

  22
• Test Run

  22
• Mounting

  23
• Recommended Adjustments

  24
• SECTION 4: OPERATIONS

  25
• Operation Safety

  25
• Switch/Lockout

  25
• Installing/Removing Drill Bits

  25
• Choosing Speeds

  26
• Changing Speeds

  27
• Drilling

  28
• Depth Stop

  29
• Adjusting Table

  29
• Arbor Removal

  30
• SECTION 5: ACCESSORIES

  31
• SECTION 6: MAINTENANCE

  34
• General

  34
• Cleaning

  34
• Unpainted Cast Iron

  34
• Lubrication

  34
• V-Belts

  34
• SECTION 7: SERVICE

  35
• About Service

  35
• Troubleshooting

  35
• Depth Stop Calibration

  38
• Feed Shaft Spring Tension

  38
• SECTION 8: WIRING

  40
• Wiring Safety Instructions

  40
• Electrical Components

  41
• G7943/G7944 Wiring Diagram

  42
• G7943/G7944 Breakdown

  43
• G7943/G7944 Parts List

  44
• Label Placement and Parts List

  46
• WARRANTY AND RETURNS

  49
• Included Plug Type

  5
• Number of T Slots

  4
• Number of Spindle Speeds

  12
• Included Plug Type

  5
• Number of T Slots

  4
• Number of Spindle Speeds

  12
• • Wrench 16mm

  1
• • Wrench 9⁄16.

  1
• • Plumb Bob

  1
• • People for Lifting Help

  1
• • Rubber Mallet

  1
• • 60W Light Bulb

  1
• • Permanent Marker

  1
• • Carriage Bolts M10-1.5 x 95

  4
• • Flat Washers 10mm

  4
• • Hex Nuts M10-1.5

  4
• • Ruler

  1
• • Drill

  1
• • Drill Bit 11⁄32"

  1
• • Plywood 3⁄4" x 23­3⁄4" x 233⁄4"

  2
• • Wood Screws #6 x 11⁄4"

  24
• 1. Table

  1
• 2. Table Support Assembly

  1
• 3. Small Lock Lever

  1
• 4. Large Lock Lever

  1
• 5. Crank Lever

  1
• 6. Handle

  1
• 7. Column

  1
• 8. Base

  1
• 9. Lock Wrench

  1
• 10. Downfeed Handles

  3
• 11. Arbor

  1
• 12. Drift Key

  1
• 13. Chuck Key

  1
• 14. Chuck

  1
• 15. Headstock Assembly

  1
• 16. Hardware Bag (Not Shown)

  1
• —Belt Cover Knob

  1
• —Hex Wrench 3mm

  1
• —Hex Wrench 5mm

  1
• —Hex Bolt M10-1.5 x 25mm

  4
• Base

  1
• Column

  1
• Crank Handle

  1
• Hex Bolts M10-1.5 x 25

  4
• Handle

  1
• Large Lock Lever

  1
• Small Lock Lever

  1
• Headstock

  1
• Table

  1
• Downfeed Handles

  3
• 60W Light Bulb

  1
• Assembled Drill Press

  1
• Lag Bolts 3 ⁄ 8-16 x 3 (Not Included)

  4
• Carriage Bolts M10-1.5 x 95 (Not Included)

  4
• Flat Washers 10mm (Not Included)

  4
• Hex Nuts M10-1.5 (Not Included)

  4
• • Plywood ⁄4" x 23­ ⁄4" x 23 ⁄4"

  2
• • Wood Screws #6 x 11⁄4"

  24