Справочник ПользователяСодержаниеHP XC Systems with HP Server Blades and Enclosures HowTo1Table of Contents31 Overview91.1 Minimum Requirements91.2 Read the Documentation Before You Begin91.3 Supported Server Blade Combinations101.4 c-Class Server Blade Hardware Components101.4.1 Supported HP ProLiant C-Class Server Blade Models101.4.2 Enclosures and Onboard Administrators111.4.3 iLO2 Console Management Device111.4.4 Management Processor Console Management Device121.4.5 Mezzanine Cards121.4.6 Interconnect Modules122 Task Summary and Checklist132.1 Best Practice for System Configuration132.2 Installation and Configuration Checklist133 Cabling153.1 Network Overview153.2 Cabling for the Administration Network153.3 Cabling for the Console Network163.4 Cabling for the Interconnect Network173.4.1 Configuring a Gigabit Ethernet Interconnect173.4.2 Configuring an InfiniBand Interconnect183.4.3 Configuring the Interconnect Network Over the Administration Network193.5 Cabling for the External Network193.5.1 Configuring the External Network: Option 1193.5.2 Configuring the External Network: Option 2203.5.3 Configuring the External Network: Option 3 - Non Gigabit Ethernet Interconnect Clusters213.5.4 Creating VLANs224 Installing HP XC System Software On the Head Node234.1 Task 1: Refer to the Installation Guide234.2 Task 2: Install HP XC System Software on the Head Node234.2.1 Connect to the Onboard Administrator234.2.2 Start the Installation245 Discovering the Hardware Components275.1 Task 1: Prepare for the System Configuration275.1.1 Node Naming Differences275.1.2 Head Node Naming275.2 Task 2: Change the Default IP Address Base (Optional)285.3 Task 3: Use the cluster_prep Command to Prepare the System285.4 Task 4: Discover Switches295.5 Task 5: Set the Onboard Administrator Password305.6 Task 6: Discover Enclosures and Nodes306 Making Node-Specific Settings336.1 Making Settings on Non-Blade Servers336.2 Making Settings on HP ProLiant Server Blades336.3 Making Settings on HP Integrity Server Blades367 Configuring the HP XC System397.1 Task 1: Install Patches or RPM Updates397.2 Task 2: Refer To the Installation Guide For System Configuration Tasks397.2.1 Using Specific IP Addresses to Configure InfiniBand Interconnect Switch Controller Cards397.2.2 Running the startsys Command With Specific Options To Start the System and Propagate the Golden Image397.3 Task 3: Verify Success407.4 You Are Done408 Troubleshooting418.1 One or More Ports Do not Communicate Properly on a Gigabit Ethernet Switch418.2 lsadmin limrestart Command Fails41A Configuration Examples43A.1 Gigabit Ethernet Interconnect With Half-Height Server Blades43A.2 InfiniBand Interconnect With Full-Height Server Blades43A.3 InfiniBand Interconnect With Mixed Height Server Blades44Index47Размер: 1,1 МБСтраницы: 48Язык: EnglishПросмотреть