Справочник ПользователяСодержание1 Introduction43 Calibration Checklist5Audio Connections6Ethernet Connection8Initial Network Connection85 Software Operation using the Java Remote9Using the JAVA Remote9Speaker Setup Screen9Distance/Delay settings9EQ settings and Mute Control9Channel Gain/Trim Adjust96 Software Operation using London Architect™10London Architect™ Software Setup10Network Control Panel10Initial Software Connection to the SDEC10Open from a design file10Opening from a Network Device11Firmware Upgrade11HiQnet Node Address11Design Configuration11ONLINE Mode12Speaker Configuration and Instructions12EQ Controls13Channel Delay (Speaker Distance Offset Correction)14Channel Output157 Speaker Sound Check168 Speaker Phase Test16Main Speakers16Surround Speakers16S4Ai configured as Bipole (default)16Dipole Surrounds17Direct Radiating Point Source Surrounds17Using the Phase Tester17Cricket-S17Cricket-R179 Setting Output Level18Setting Levels before Calibrating18Final Level Set after Calibrating18Using the SPL Meter18Analog SLM Instructions18Digital SLM Instructions1810 DACS Measurement System1910.1 DACS Hardware Setup1910.2 Channel Test and System Calibration19Parametric Filter Values2011 Saving Your Work2011.1 Save a copy using SAVE AS2011.2 Save to Network Device2012 Recalling Saved Settings2012.1 Recalling from a Saved File2012.2 Recalling without a Saved File2012.3 Recalling from Network Device2013 Advanced Features2113.1 Cinema/Music Subwoofer Output21RS232 Settings21Ethernet Settings21Command Strings21Contact Closure Trigger2113.2 Multiple EQ Presets21Saving Presets21Recalling Presets2113.3 Parameter Synchronization2114 Troubleshooting Guide23Размер: 2,5 МБСтраницы: 24Язык: EnglishПросмотреть
