Инструкции для Lexmark X364dw

Содержание

• Contents

  3
• Setting up the printer

  5
  • Follow these steps to set up your printer

    5
  • Setting up the printer hardware

    5
• Choosing a connection method

  10
• Preparing to connect wirelessly

  11
  • Information you will need to set up the printer on a wireless network

    11
  • Adding the printer to a network using MAC address filtering

    11
• Connecting to a wireless network using Windows

  13
  • Installing the printer on a wireless network (Windows)

    13
• Connecting to a wireless network using Macintosh

  15
  • Installing the printer on a wireless network (Macintosh)

    15
• Troubleshooting wireless setup

  19
  • Wireless troubleshooting checklist

    19
  • Printing a network setup page

    19
  • Cannot print over the wireless network

    20
    • Make sure your computer is connected to your wireless access point (wireless router)

      20
    • Move the computer and/or printer closer to the wireless router

      20
    • Move your access point to minimize interference

      20
    • Check whether the printer is on the same wireless network as the computer

      20
    • Check your WEP key or WPA passphrase

      22
    • Disconnect from VPN session

      22
    • Check your advanced security settings

      23
  • Communication with printer lost when connected to Virtual Private Network (VPN)

    23
  • Wireless configuration does not continue after the USB cable is attached

    23
  • WEP key or WPA pre-shared key not valid

    24
    • Error made when entering key

      24
  • Network does not appear in the Wireless Networks list

    24
    • Network does not broadcast its SSID

      24
    • The printer will be moved to a remote network

      25
    • The printer or installing computer is too far away from the access point

      25
    • The wireless network is not functioning

      25
    • There is RF (Radio Frequency) interference between the wireless access point and the installing computer

      25
    • There is an object blocking the signal between the printer and the access point

      26
    • There are too many devices on the wireless network

      26
  • Wireless Setup Utility unable to communicate with printer

    26
  • Wireless Setup Utility stops responding during wireless printer configuration

    27
  • Printer does not print after wireless configuration completes

    27
    • Make sure the printer is turned on

      27
    • Verify that the printer is ready

      27
    • Disable third-party firewalls

      27
    • Verify that the wireless network is working properly

      27
    • Verify that the correct port or printer is selected

      27
    • Verify that Windows is working properly

      27
    • Verify that the printer is working

      28
    • Make sure the printer driver is installed on the printer

      28
  • Cannot print and there is a firewall on the computer

    28
  • Network printer does not show up in the printer selection list during installation

    28
    • Make sure the printer is on the same wireless network as the computer

      28
• Connecting using a USB cable

  30
  • USB setup and connection

    30
• Connecting using an Ethernet network

  32
  • Wired setup and connection

    32
• Networking glossary

  33
• Index

  35