Справочник ПользователяСодержаниеMaster Table of Contents6Safety2Section A - Installation7Section B - Operation15Section C - Accessories27Section D - Maintenance29Section E - Theory of Operation31Section F - Troubleshooting and Repair37Major physical or electrical damage is evident when the sheet metal cover(s) are removed.40The machine is dead—no fan –no output—no LEDs.40The main input fuses or breakers repeatedly fail.40No or low output. Error code “E11” is flashing on the digital display.41No or low output. Error code “E12” is flashing on the digital display.41No output. Error code “E10” is flashing on the digital display. The thermal indicator light is on.41Error code “E20”, “E24”, or “E25” is flashing on the digital display.42The machine functions normally except the cooling fan does not operate.42No High Frequency when the torch trigger is pulled and the machine is in the TIG mode.42Error code “E14” is flashing of the digital display42No current regulation in the Stick mode. Low open circuit voltage.43There is no response to changes to the output control settings. No current regulation in all modes.43The machine does not have welding output in the Stick mode. Zero volts open circuit voltage. The Output LED on the control panel is blinking. The machine operates correctly in the TIG mode44The machine does not have welding output in either the Stick or TIG modes. Zero volts open circuit. The Output LED on the control panel is blinking.44The machine operates properly in the Stick and DC TIG modes. AC TIG mode does not function properly.44Размер: 4,3 МБСтраницы: 109Язык: EnglishПросмотреть