Инструкции для MTD 503

Справочник Пользователя (English, Français)

Справочник Пользователя

Содержание

Figure 4
6
Figure 1
6
Figure 2
6
Figure 3
6
NOTE: Your mower is shipped with the handle in the higher position. If you wish to lower the height of the handle refer to the Adjustment Section.
6
- Figure 5
  7
NOTE: If the starter rope becomes disconnected from rope guide on handle, disconnect and ground the spark plug wire. Depress the...
7
- Figure 6
  7
NOTE: For proper assembly, install bottom lip inside chute opening before placing hooks over the hinge pin.
7
- Figure 7
  7
- Figure 8
  8
- Figure 9
  8
- Figure 10
  9
NOTE: The blade control handle must be depressed in order to operate the unit. Release the blade control handle to stop the engine and blade.
9
- Figure 11
  10
NOTE: All wheels must be in the same height of cut.
10
- Figure 12
  10
- Figure 13
  11
NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to electric components, spindles, pulleys, bearings, or the engine. The use of water will result in shortened life and reduce serviceability.
11
- Figure 14
  12
NOTE: Improper blade balance will result in excessive vibration causing eventual damage to the engine and mower. Be sure to care...
12
NOTE: Always remove blade from the adapter for testing balance.
12
NOTE: Cutting grass in sandy soil condition causes abrasive wear to the blade.
12
NOTE: When storing any type of power equipment in a poorly ventilated or metal storage shed, care should be taken to rust-proof ...
12
NOTE: For repairs beyond the minor adjustments listed above, contact an authorized service dealer.
13

Справочник Пользователя

Размер:

5,9 МБ
Страницы:

32
Языки:

English, Français

Просмотреть