Инструкции для Multi-Tech Systems MT5634SMI V.92

Содержание

• Chapter 1 – AT Commands, S-Registers and Result Codes

  5
• Introduction

  5
• AT Command Summary

  6
• AT Commands

  8
• Escape AT Commands

  21
• V.92 Commands

  22
• S-Registers

  28
• Result Codes

  31
• Chapter 2 – Fax Class 1 and Class 1.0 Commands

  33
• Fax I/O Processing

  33
• DTE-to-Modem Transmit Data Stream

  33
• Modem-to-DTE Receive Data Stream

  33
• Fax Mode Selection

  34
• Fax Origination

  34
• Fax Answering

  34
• Fax Control Transmission

  34
• Fax Control Reception

  35
• Fax Data Transmission

  36
• Fax Data Reception

  36
• Commands and Parameters

  37
• Mode Entry Commands

  37
• Mode Commands

  37
• Service Class 1 Commands

  41
• Examples

  45
• Chapter 3 – Fax Class 2 and 2.0/2.1 Commands

  48
• Introduction

  48
• AT Command Implementation

  49
• Modes of Interaction

  50
• AT Command Mode

  50
• Command Execution Mode

  52
• Data Transfer Mode

  52
• Commands and Responses Overview

  55
• Action Commands

  55
• Modem Responses

  56
• Parameters for Mandatory Services

  57
• Parameters for Optional Services

  58
• Identification Commands

  59
• Service Class Indication

  59
• Service Class Capabilities

  59
• Service Class Selection

  60
• Request Manufacturer Identification

  60
• Request Model Identification

  60
• Request Revision Identification

  60
• Action Commands

  61
• Originate a Call

  61
• Answer a Call

  61
• Data Transmission

  62
• Post-Page Message Release

  62
• Data Reception

  63
• Session Termination

  63
• Initialize Facsimile Parameters

  63
• Modem Responses

  64
• T.30 Phase A Negotiation Responses

  64
• T.30 Phase B Negotiation Responses

  65
• T.30 Phase C Page Reception Responses

  68
• T.30 Phase D Post Page Responses

  69
• Call Termination with Status

  69
• Parameter Commands

  72
• T.30 Session Parameters

  72
• T.30 Procedure Control Parameters

  82
• Phase C Data Format Parameters

  87
• Miscellaneous Parameters

  92
• Session Message Report Responses

  93
• Sample Modem Control Sessions

  94
• Send two pages, 1-D data, no errors (Class 2)

  94
• Receive two pages, 1-D data, no errors (Class 2)

  95
• Send two pages, 1-D data, no errors (Class 2.0)

  96
• Receive two pages, 1-D data, no errors (Class 2.0)

  97
• Originate and send a two page facsimile with V.34 half-duplex (Class 2.1)

  98
• Answer and receive a two-page facsimile with V.34 half-duplex (Class 2.1)

  99
• Alphabetic List of Commands and Responses

  100
• ASCII Conversion Chart

  102
• Chapter 4 – Voice Commands

  103
• Introduction

  103
• Voice S-Register Summary

  104
• Voice Commands

  104
• Commands That Change for Voice Mode Support

  104
• Voice +V Commands Summary

  105
• Voice +V Commands Detail

  105
• Interface Configuration Commands

  119
• Flow Control

  121
• Voice Mode Result Codes

  121
• Unsolicited Voice Mode Result Codes

  122
• Valid Complex Event Report Tags

  122
• Voice Mode Shielded Codes

  123
• Sample Sessions

  125
• Sample Rate Selection and Suggested Compression Method

  125
• Answer Phone, Play Greeting Message, and Record Message Example

  126
• DTE/DCE Interface Rates

  128
• Chapter 5 – Remote Configuration and Country Code Configuration

  129
• Remote Configuration

  129
• Basic Procedure

  129
• Setup

  129
• Country Code Configuration

  130
• Using the Global Wizard Utility

  130
• Using AT Commands

  130
• Index

  131
• &F – Load Factory Settings

  12
• &G – Guard Tone Control

  12
• &K – Flow Control

  12
• +FBO

  87
• &L – Leased Line Operation

  13
• +FBOR

  87
• &P – Pulse Dial Make to Break Ratio

  13
• +FVRFC – Vertical Resolution Format Conversion

  89
• &Q – Asynchronous Communications Mode

  13
• &S – Data Set Ready (DSR)

  13
• &T – Louupback Test

  13
• &V – Disply Current Settings

  14
• &W

  129
• digital loss when used with PBX S108

  30
• &W – Store Current Configuration

  14
• &Z=

  14
• +++AT – Escape Sequence

  21
• +VDR= - Distinctive Ring Report

  18
• Abort timer - S7

  28
• A - Answer

  8
• \A – Select Maximum MNP Block Size

  14
• adaptive answer

  61
• A/ - Repeat Last Command

  8
• Adaptive Answer - +FAA

  85
• AT – Attention Code

  8
• B - Communication Standard Setting

  8
• Address & Polling Capabilities - +FAP

  80
• \B – Transmit Break

  14
• Addressing & Polling Frames - +FSA, +FPA, +FPW

  81
• -C – Data Calling Tone

  16
• Answer Call command

  61
• D - Dial

  9
• Answer command - A

  8
• Definition

  5
• Answer parameter

  85
• disabling response to

  16
• ASCII code

  102
• DS= - Dial Stored Number

  9
• E – Echo Command Mode

  9
• Asynchronous Word Length - $EB

  17
• F – Echo Online Datat

  9
• AT Command Control command - %DC

  16
• format

  5
• AT Command Summary

  6
• H – Hook Control

  9
• AT commands

  5
• I – Information Request

  10
• #CBA – Callback Attempts

  19
• \K – Break Control

  15
• #CBD – Callback Delay

  19
• M – Monitor Speaker Mode

  10
• #CBF? – Callback Failed Attempts Display

  19
• \N – Error Correction Mode

  15
• #CBFR – Callback Failed Attempts Reset

  19
• N – Modulation Handshake

  10
• #CBN= - Store Callback Password

  19
• #CBP – Callback Parity

  19
• O – Return Online to Data

  10
• #CBR – Callback Security Reset

  20
• P – Pulse Dialing

  10
• #CBS – Callback Enable/Disable

  20
• \Q – Flow Control

  15
• #P – Set 11-Bit Parity

  20
• Q – Result Codes Enable/Disable

  10
• #S - Change MTSMODEM Password

  129
• Sr= - Set Register Value

  11
• #S – Enter Setup Password

  20
• \T – Inactivity Timer

  15
• #S= - Change Password

  129
• T = Tone Dialing

  11
• #S= - Store Setup Password

  20
• \V – Protocol Result Code

  16
• $D – DTR Dialing

  17
• V – Result Code Format

  11
• $EB – Asynchronous Word Length

  17
• \V – XON/XOFF Pass Through

  16
• $MB – Online BPS Speed

  17
• W – Result Code Options

  11
• $SB – Serial Port Baud Rate

  18
• X – Result Code Selection

  11
• Z – Resetting the Modem

  11
• Sequence

  21
• %A – Adaptive Answer Result Code

  16
• Enter key

  8
• %B – View Blacklist Numbers

  16
• AT commands - #CBI

  19
• %C – Data Compression Control

  16
• %DC – AT Command Control

  16
• Priority

  18
• %E – Fallback and Fall Forward

  17
• AT commands - Sr? – Read Register Value

  11
• %H – Direct Connect Enable

  17
• Attention code command - AT

  8
• %R – Cisco Configuration

  17
• Autoanswer

  5
• %S – Command Speed Response

  17
• Autoanswer - S0

  28
• &C – Data Carrier (DCD) Control

  12
• Automatic Hang-Up Control command +VNH=

  107
• &D – DTR Control

  12
• &E – XON/XOFF Pacing Control

  12
• +FET:- Post Page Message

  69
• +FHNG:- Call Termination with Status

  69
• Backspace character - S5, setting

  28
• +FK – Session Termination

  63
• Bad Line Threshold parameter

  84
• +FLCASS=<value> - Service Class Selection

  60
• Bell 212A mode

  8
• +FLP – Indicate Document to Poll

  78
• Blacklist command

  16
• +FLPL – Indicate Document to Poll

  78
• Break Control command - \K

  15
• +FMDL? – Request Model ID

  60
• Break Signal

  15
• +FMFR? – Request Manufacturer ID

  60
• Buffer Size parameters

  92
• +FMINSP – Minimum Phase C Speed

  86
• +FMS – Minimum Phase C Speed

  86
• Call Termination with Status - +FHS

  69
• call waiting

  23
• +FPHCTO - Host Phase C Response Timeout

  85
• Call Waiting Enable command - +PCW=

  23
• +FPOLL – Remote Polling Indication

  65
• +FPTS – Page Transfer Status

  82
• Callback Delay command - #CBD

  19
• +FPTS - Receive Page Transfer Status

  68
• Callback Delay command #CBD

  26
• +FREV? – Request Revision ID

  61
• Callback Enable/Disable command - #CBS

  20
• +FSPL – Request to Poll

  78
• Callback Enable/Disable command #CBS

  27
• +FTSI:- Report Remote ID

  66
• Callback Failed Attempts Display command - #CBF?

  19
• A – Answer a Call

  61
• Callback Failed Attempts Display command #CBF?

  26
• Copy Quality Checking+FCQ

  83
• D Originate a Call

  61
• +FDFFC – Data Compression Format Conversion

  89
• callback attempts

  26
• callback delay time

  26
• +FLO – Fax Flow Control

  90
• callback failed attempts reset

  26
• callback security reset

  26
• +FBU – Buffer Size

  92
• failed password attempts

  26
• AT+FTD – Set Time & Date

  91
• inactivity timer

  26
• +FDCS? – Current Session Results

  73
• +FLID – Local ID String

  77
• setup password

  27
• Callback Security Reset command - #CBR

  20
• AT+FPH – Page Header Generation

  91
• Caller ID

  25
• Caller ID Selection command - +VCID=

  25
• +FHT – Report Transmit HDLC Frames

  93
• Capability to Receive - +FCR

  79
• Carriage return character - S3

  28
• 1+FVRFC – Format Conversion

  88
• Carrier loss disconnect time - S10, setting

  28
• Cisco Configuration command - %R

  17
• - +FDR – Data Reception

  63
• Class

  93
• +FAA – Adaptive Answer

  85
• +FAP – Address & Polling Capabilities

  80
• +FLNFC – Page Lenght

  89
• +FBU – Session Message Reporting

  79
• +FVRFC – Page Width

  90
• +FCC= - Modem Capabilities Parameters

  72
• +FCI:- Report Remote ID

  66
• +FEA – Phase C Received EOL Alignment

  87
• +FCLASS= - Service Class Selection

  60
• +FREL - Phase C Received EOL Alignment

  87
• +FCLASS=? – Service Classes Available

  59
• +FCO – Fax Connection Response

  64
• +FAA - Adaptive Answer

  85
• +FCQ – Copy Quality Checking

  83
• +FAXERR – T.30 Session Error Report

  86
• +FCR – Capability to Receive

  79
• +FBADLINL – Bad Line Threshold Parameter

  84
• +FBADMUL

  84
• +FDM – Transition to Data Modem

  64
• +FBO – Data Bit Order

  87
• +FDT – Data Transmission

  62
• +FBOR – Data Bit Order

  87
• +FET – Post Page Message

  69
• +FBUG – Session Message Reporting

  79
• +FHS:- Call Termination with Status

  69
• +FCIG – Local Polling ID String

  77
• +FIP – Initialize Fax Parameters

  63
• +FCIG:- Report Remote ID

  66
• +FIS\ - Report DIS/DCS/DTC Frame Information:

  65
• +FCLASS? – Service Class Setting

  59
• +FIS= - Current Sessions Parameters

  73
• +FCON – Fax Connection Response

  64
• +FKS – Session Termination

  63
• +FCR – Capability to Receive

  79
• +FMM?

  60
• +FCSI:- Report Remote ID

  66
• +FMR? – Request Revision ID

  60
• +FDCC= - Modem Capabilities Parameters

  72
• +FNC:- Report Non-Standard Negotiation Frames

  66
• +FDIS= - Current Sessions Parameters

  73
• +FNF:- Report Non-Standard Negotiation Frames

  66
• +FDR - Data Reception

  63
• +FNR – Negotiation Reporting

  80
• +FDT – Data Transmission

  62
• +FNS:- Report Non-Standard Negotiation Frames

  66
• +FDTC:

  65
• +FPA – Addressing & Polling Frames

  81
• +FPA:- Report Addressing or Password Strings

  67
• +FPI – Local Polling ID String

  77
• AT+FCLASS=?

  106
• +FPI:- Report Remote ID

  66
• Distinctive Ring command - +VDR=

  25
• +FPO – Remote Polling Indication

  65
• Distinctive Ring Report command +VDR=

  18
• +FPS – Page Transfer Status

  82
• downstream data rate set S38

  29
• +FPS – Receive Page Transfer Status

  68
• DSR Control command - &S

  13
• +FPW – Addressing & Polling Frames

  81
• DTE Phase C Response Timeout parameters

  85
• +FPW:- Report Addressing or Password Strings

  67
• DTE/DCE Interface Rates

  128
• +FRQ – Receive Quality Thresholds

  84
• +FSA – Addressing & Polling Frames

  81
• +FCLASS=8

  106
• +FSA:

  67
• +FSP – Request to Poll

  78
• DTR Dialing command - $D

  17
• +FTC:- Report DIS/DCS/DTC Frame Information

  65
• +FTI\ - Report Remote ID

  66
• D - Originating a Call

  61
• Echo Command Mode Characters command - E

  9
• +FCS? – Current Session Results

  73
• Echo Online Data Characters command - F

  9
• +FLI – Local ID String

  77
• +FNS – Non-standard Frame FIF Octet String

  78
• +VPP=

  119
• Comma, setting pause time - S8

  28
• Command Execution Mode

  52
• command +VDR=

  116
• Command mode

  5
• enables the V.25 calling tone - S35

  28
• Command Speed Response command - %S

  17
• Command string

  5
• Enter Voice Receive State command - +VRX

  108
• commands and responses

  55
• Error control - S36, setting

  28
• Commands and Responses Overview Fax Class 2

  55
• Error control, setting S48

  30
• Communication Standard command - B

  8
• Error Correction Mode Selection command - \N

  15
• Communications programs

  5
• Error Threshold Multiplier parameter

  84
• Compound Parameters

  51
• Escape AT Command

  21
• Escape character - S2

  28
• Global Wizard

  130
• Escape sequence

  5
• remote

  129
• %% - literal % character in AT+FPH

  92
• Selecting reset configuration command - &W

  14
• %d - day of month in AT+FPH

  92
• %h - hour in AT+FPH

  92
• Copy Quality Checking - +FCQ

  83
• %I - hour, 24-hr clock, AT+FPH

  92
• Country Code, Displaying

  10
• %j - day of year in AT+FPH

  92
• Current Session Parameters - +FIS

  73
• %M - minute in AT+FPH

  92
• Current Session Results Parameters - +FCS?

  73
• %m - month in AT+FPH

  92
• Current Sessions parameters

  73
• %p - am or pm in AT+FPH

  92
• %P - current page of fax in AT+FPH

  92
• %r - ID of remote fax machine in AT+FPH

  92
• %s - time seconds expression in AT+FPH

  92
• Data Bit Order parameters

  87
• %t - ID of transmitting fax machine in AT+FPH

  92
• Data buffering

  13
• %y - year w/o century in AT+FPH

  92
• Data Calling Tone command -C

  16
• %Y - year with century in AT+FPH

  92
• Data Carrier Detect command

  12
• Escape sequence - %%%ATMTSMODEM

  21
• Data Compression Control command - %C

  16
• Escape sequence +++AT

  21
• Data Compression Format Conversion - +FDFFC

  89
• Event Reporting and Masking command - +VEM=

  117
• Data Reception - +FDR

  63
• Answer, Play Greeting, Record Message

  126
• Data Reception command

  63
• Compression Methods

  125
• Data Set Ready Control command

  13
• Example of Transmission and Reception

  49
• Data Terminal Ready Control command

  12
• Examples of calling/answering table

  45
• Data Transfer Mode

  52
• Data Transmission - +FDT

  62
• Data Transmission command

  62
• DCD Control command - &C

  12
• Facsimile Connection response

  64
• DCE Capabilities Parameters

  72
• Fallback

  10
• DCE responses

  64
• Fallback and Fall Forward command - %E

  17
• Diagnostic Information, Displaying

  10
• Fax adaptive reception control parameter - +FAR

  41
• Dial command - D

  9
• fax answering

  34
• Dial Stored Telephone Number command - DS=

  9
• Fax carrier loss timeout parameter - +FCL

  41
• Dial string modifiers

  9
• Dialing tones - S11

  28
• Direct Connect Enable command - %H

  17
• Fax Class 1 and Fax Class 1.0 Commands Table

  34
• Display Current Settings command - &V

  14
• Fax Class 1.0 auto answer enable command - +FAA

  37
• AT Command Implementation

  49
• AT Command Mode

  50
• Fax Class 2 Parameter Table

  54
• identification commands

  59
• +FAA – Auto Answer Enable Class 1.0

  37
• Event Reporting Capabilities command +VLS=?

  112
• +FAE – Auto Answer Enable Clas 1 & 1.0

  37
• Inactivity timer - S30

  28
• +FAR – Adaptive Reception Control

  41
• Inactivity Timer command - \T

  15
• +FCL – Carrier Loss Timeout

  41
• Indicate Document to Poll - +FLP

  78
• +FCLASS=1 – Select Facsimile Class 1 Mode

  37
• Information Request command - I

  10
• +FCLASS=1.0 – Select Facsimile Class 1.0 Mode

  37
• Initialization strings

  5
• +FDD – Double Escape Character Replacement

  42
• Initialize Fax Parameters

  63
• +FIT – DTE Inactivity Timeout

  42
• Initialize Fax Parameters - +FIP

  63
• +FLO – Flow Control

  44
• Initialize Voice Parameters command - VIP

  107
• +FMI? – Request Manufacturer Identification

  43
• +FMM? – Request Model Identification

  43
• +FMR? – Request Revision Identification

  43
• +VBT=? – Report Modem Flow Control

  119
• +FPR – Fixed DTE Rate

  43
• +VPP= - Enable/Disable Voice Mode

  119
• +FRH – Receive Data With HDLC Framing

  40
• +VPR= - Select DTE/DCE Interface Rate

  120
• +FRM – Receive Facsimile

  39
• Interface Configuration Commands

  119
• +FTH – Transmit Data with HDLC Framing

  40
• +FTM – Transmit Facsimile

  38
• +FTS – Receive Silence

  38
• +FTS – Transmit Silence

  37
• Leased Line Operation command - &L

  13
• Fax Connection Response - +FCO

  64
• Line feed character - S4

  28
• fax control reception

  35
• Load Factory Settings command - &F

  12
• fax control transmission

  34
• Local Callback Inactivity Timer command - #CBI

  26
• fax data reception

  36
• fax data transmission

  36
• Callback Inactivity Timer

  19
• Local ID String - +FLI

  77
• - +FDD

  42
• Local Polling ID String

  77
• Fax DTE inactivity timeout parameter - +FIT

  42
• Local Polling ID String - +FPI

  77
• Fax fixed DTE rate parameter - +FPR

  43
• Loopback Test commands - &T

  13
• Fax Flow Control - +FLO

  90
• Fax flow control parameter - +FLO

  44
• fax I/O processing

  33
• fax origination

  34
• Mandatory Parameter Commands

  57
• Minimum Phase C Speed - +FMS

  86
• Fax Receive Facsimile - +FRM

  39
• miscellaneous parameters

  92
• Fax Receive Silence - +FRS

  38
• MNP 5 data compression

  16
• MNP Error Correction

  15
• Fax request model identification parameter - +FMM?

  43
• Modem on Hold

  24
• Modem on Hold Enable command - +PMH=

  23
• Fax Service Class 2 and Service Class 2.0/2.1

  48
• Modem on Hold Initiate command - +PMHR=

  24
• Fax Transmit Data with HDLC Framing - +FTH

  40
• Modem on Hold Timer command - +PMHT=

  24
• Fax Transmit Facsimile - +FTM

  38
• Modem Reset command - Z

  11
• Fax transmit silence command - +FTS

  37
• Modes of Interaction

  50
• Firmware Version, Displaying

  10
• Modulation Handshake command N

  10
• flash

  24
• Modulation Selection command - +MS=

  22
• Flow control

  15
• Monitor Speaker Mode command - M

  10
• Flow Control

  121
• Flow Control Selection command - &K

  12
• Flow Control Selection command - \Q

  15
• frame information

  65
• Negotiation Reporting - +FNR

  80
• Non-standard Frame FIF String - +FNS

  78
• Numeric Parameters

  51
• Global Wizard

  130
• Guard Tone Control command

  12
• On-hook/off-hook

  9
• Online BPS Speed command - $MB

  17
• Online command mode

  5
• Handshake

  10
• Optional Parameter Commands

  58
• Hangup command

  9
• Originate a Call - D

  61
• Hook Control command - H

  9
• Hose Phase C Response Time Out - +FPHCTO

  85
• Host Phase C Response Timeoout

  85
• Page Header Generation

  91
• Page Transfer Status - +FPS

  82
• Result Code Selection command - X

  11
• Page Width Format Conversion - +FWDFC

  90
• Result codes

  5
• Parameter Commands

  72
• Result Codes

  31
• Result Codes Enable/Disable command - Q

  10
• Pause time for comma - S8, setting

  28
• Return Online to Data Mode command - O

  10
• PCM Upstream Ignore command - +PIG=

  23
• Phase C Data Format - +FBO

  87
• Rings counted - S1

  28
• Phase C Received EOL Alignment - +FEA

  87
• Rings S0, setting number of

  28
• polling

  65
• ROM Checksum

  10
• Post Page Message Response - +FET

  69
• Post-Page Message Release command

  62
• command +VTS=

  108
• Protocol Result Code command - \V

  16
• Generation Duration) command +VTD=

  115
• Pulse Dialing command - P

  10
• command - +VPR=

  120
• select Fax Class 1 command - +FCLASS=1

  37
• select Fax Class 1.0 command - +FCLASS=1.0

  37
• Select Flow Control Method command - +FLO=

  107
• Quick Connect

  25
• Select Maximum MNP Block Size command - \A

  14
• Quick Connect Control command - +PQC=

  25
• Select Stored Configuration command &W

  14
• Serial Port Baud Rate command - $SB

  18
• Rate S37, maximum data

  29
• Service Class Available - +FCLASS

  59
• Read Register Value command Sr?

  11
• Service Class Capabilities command

  59
• Receive Page Transfer Status response - +FPS

  68
• Service Class Selection - +FCLASS=<value>

  60
• Receive Quality Thresholds - +FRQ

  84
• Service Class Selection command

  60
• Remote configuration

  129
• Session Message Report Responses

  93
• Escape character

  129
• Session Message Reporting - +FBU

  79
• Escape character - S9

  28
• Session Termination - +FKS

  63
• Remote Escape AT Command

  21
• Session Termination command

  63
• Remote escape character, changing

  129
• Remote ID Responses - +FTI, +FCI, +FPI

  66
• Set Current Time & Date

  91
• remote IDs

  66
• Set DTE/DCE Inactivity Timer command - VIT=

  110
• Remote Polling Indication Response - +FPO

  65
• Repeat Last command - A/

  8
• command - +VBT=

  119
• Set Register Value command - Sr=

  11
• +FPA, +FPW

  67
• +FCS, +FIS, +FTC

  65
• Set Silence Detection Sensitivity command +VSD=

  113
• command - +VEM=?

  118
• Report Frequency Support command - +VTS=?

  109
• +VGR=

  110
• Report Manufacturer’s ID command - +FMI?

  107
• +VGT=

  110
• command - +VBT=?

  119
• Setup password

  129
• Setup password, changing

  129
• +FNF, +FNS, +FNC

  66
• sleep mode S89

  30
• Report Product ID command - +FMM?

  107
• Speaker Mode command

  10
• Report Received HDLC Frames response

  93
• Report Remote ID responses

  66
• Maximum S37

  29
• Report Transmit HDLC Frames response

  93
• Speed conversion (data buffer)

  13
• Report Version Level command - +FMR?

  107
• S2 – Escape Sequence

  28
• S-Registers

  28
• Request Manufacturer ID - +FMI

  60
• reading

  11
• Request Manufacturer Identification command

  60
• S0 – Sets Number of Rings

  28
• Request Model ID - +FMM?

  60
• S1 – Counts Rings

  28
• Request Model Identification command

  60
• S10 – Carrier Loss Disconnect Time

  28
• Request Revision ID - +FMR?

  60
• S108 – 56K Operation Digital Loss

  30
• Request Revision Identification command

  60
• S11 – Dialing Tones

  28
• Request to Poll - +FSP

  78
• S28 – V.34 Modulation

  28
• S3 – Carriage Return

  28
• responses

  64
• S30 – Inactivity Timer

  28
• Result Code Format command - V

  11
• S35 – V.25 Calling Tone

  28
• Result Code Options command - W

  11
• S36 – Error Control

  28
• S37 – Maximum Speed

  29
• +MS= - Modulation Selection

  22
• S38 – Downstream Data Rate

  29
• +MS=? – Reports Supported Options

  22
• S4 – Line Feed Character

  28
• +PCW= - Call Waiting

  23
• S43 – Testing and Debugging

  29
• +PIG= - PCM Upstream Ignore

  23
• S48 – Error Control

  30
• +PMH= - Modem on Hold

  23
• S5 – Backspace Character

  28
• +PMHF – Modem Hook Flash

  24
• S6 – Wait Time for Dail Tone

  28
• +PMHR= - Modem on Hold Initiate

  24
• S7 – Abort Timer

  28
• +PMHT= - Modem on Hold Timer

  24
• S8 - Comma

  28
• +PQC= - Quick Connect

  25
• S89 - Standby

  30
• +VCID= - Caller ID

  25
• S9 - Remote Configuration Escape Character

  129
• +VDR= - Distinctive Ring Report

  25
• S9 – Remote Configuration Escape Character

  28
• V.92 commands - #CBD - Callback Delay

  26
• setting

  11
• Standby mode delay time S89

  30
• V.92 commands - #CBS – Callbacl Eneable/Disable

  27
• Start Voice Transmission Process command - +VTX

  110
• V.92 mode

  22
• V.92 Modem Hook Flash command - +PMHF

  24
• Vertical Resolution Format Conversion - +FLNFC

  89
• Store Setup Password command - #S

  27
• Vertical Resolution Format Conversion - +FVRFC

  89
• Store Setup Password command - #S=

  20
• String Parameters

  51
• View Numbers in Blacklist command - %B

  16
• +FCLASS=8 – Detect & Control DTMF

  106
• T.30 Phase A negotiation responses

  64
• +FCLASS= - Select Modem Operating Mode

  105
• T.30 Phase B negotiation responses

  65
• +VNH=<hook> - Automatic Hang-up Control

  107
• T.30 Phase C Page Reception responses

  68
• +FMI? – Report Manufacturer ID

  107
• T.30 Phase D post page responses

  69
• +FMM? – Report Product ID

  107
• T.30 Procedure Control Parameters

  82
• +FMR? – Report Version Level

  107
• T.30 Session Error Report - +FAXERR

  86
• +FLO=<method> - Select Flow Control Method

  107
• T.30 session parameter frames

  65
• VIP – Initialize Voice Parameters

  107
• T.30 Session Parameters

  72
• +VRX – Enter Voice Receive State

  108
• T.30 Session Subparameters

  74
• +VTS= - Produce DTMF and Tone Generation

  108
• Tone Dialing command - T

  11
• +VTS=? – Report Frequency Support

  109
• Tones - S11, dialing

  28
• +VTX – Start Voice Transmission Process

  110
• Transition to Data Modem - +FCON

  64
• +VGR= - Set Gain for Received Voice Samples

  110
• Transition to Data Modem - +FDM

  64
• Transmit Break command - \B

  14
• +VIT= - Set DTE/DCE Inactivity Timer

  110
• +VLS= - Select Analog Source

  111
• +VLS=? – Identify Analog Source

  112
• Unsolicited Voice Mode Result Codes

  122
• +VRA= - Set Ring Back Goes Away Timer

  112
• upstream mode

  23
• +VRN= - Set Ring Back Never Appeared Timer

  112
• Upstream V.90 data rates S38

  29
• +VSD= - Set Silence Detection Sensitivity

  113
• +VSM= - Voice Compression Method

  114
• +VSM=? – Report Voice Compression Method

  115
• +VTD= - Select Default Beep Tone Duration

  115
• V.22 mode

  8
• +VDR= - Enable/Disable Distinctive Ring

  116
• V.22bis Guard Tone Control command - &G

  12
• +VDT= - Control Tone Cadence Reporting

  117
• V.25 Data Calling Tone

  16
• +VEM= - Event Reporting & Masking

  117
• V.25ter +GMI?

  60
• V.34 modulation - S28, enabling

  28
• Capabilities

  118
• V.42 Error Correction

  15
• Voice Commands

  103
• V.42bis data compression

  16
• Voice Mode Result Codes

  121
• V.54 Test commands

  13
• Voice Mode Shielded Codes

  123
• Voice Sample Sessions

  125
• #CBA – Callback Attempts

  26
• #CBFR – Failed Attempts Reset

  26
• #CBI – Local Callback Inactivity Timer

  26
• #CBN= - Store Callback Password

  26
• Wait time for dial tone - S6

  28
• #CBP - Callback Parity

  26
• #P – Set 11-Bit Parity

  27
• #S – Enter Setup Password

  27
• #S= - Store Setup Password

  27
• XON/XOFF Pacing Control command - &E

  12
• +MS? – Reports Current Options

  22