Справочник ПользователяСодержаниеPackard Bell1Grafite & Carbon1Disassembly Manual1Table of Contents2About this Guide3For More Information3Technician Notes3Disassembly3 Turn OFF the power using the power button and disconnect the AC adapter.3 Do not disassemble the device into parts that are smaller than those specified here.3 Label all removed connectors; note where the connector goes and in what position.3 Use something to hold the small screws (trays, jars, or cups). Label each cup with the disassembly step number. This can reduce questions about where each screw came from during re-assembly.3Reassembly3 The LED cable goes on the outside of the hard disk drive casing, not underneath the drive!3Required Tools3Front Cover4Note: Use an anti-static mat or something soft like a piece of cloth underneath the device to prevent damage to the exterior of the casing.4Fig. 1 Removing the front cover.4Top Cover4Fig. 2 Removing the top cover.5Hard Disk Drive5Note: One of the screws on each side of the hard disk drive holds a spacer clip.5Fig. 3 Removing the hard disk drive screws.5Note: In Fig. 3 only 2 screws are visible; the other 2 screws are located on the other side of the hard disk drive.5Fig. 4 Removing the hard disk drive.6I/O Board6Fig. 5 Removing the I/O board.6Notice7Размер: 188,9 КБСтраницы: 7Язык: EnglishПросмотреть
