Справочник ПользователяСодержаниеTable of Contents2Introduction2Preparation2Making/Answering Calls2Phonebook2Caller ID Service2Voice Mail Service2Programmable Settings2Useful Information2Index3Introduction4Introduction4Accessory information5Included accessories5Additional/replacement accessories5Important safety instructions61. Read and understand all instructions.62. Follow all warnings and instructions marked on this unit.63. Unplug this unit from power outlets before cleaning. Do not use liquid or aerosol cleaners. Us...64. Do not use this unit near water, for example near a bathtub, wash bowl, kitchen sink, etc.65. Place the unit securely on a stable surface. Serious damage and/or injury may result if the un...66. Do not cover slots and openings on the unit. They are provided for ventilation and protection ...67. Use only the power source marked on the unit. If you are not sure of the type of power supplie...68. Do not place objects on the power cord. Install the unit where no one can step or trip on the ...69. Do not overload power outlets and extension cords. This can result in the risk of fire or elec...610. Never push any objects through slots in this unit. This may result in the risk of fire or ele...611. To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an autho...612. Unplug this unit from power outlets and refer servicing to an authorized service center when ...6A. When the power cord is damaged or frayed.6B. If liquid has been spilled into the unit.6C. If the unit has been exposed to rain or water.6D. If the unit does not work normally by following the operating instructions. Adjust only contro...6E. If the unit has been dropped or physically damaged.6F. If the unit exhibits a distinct change in performance.613. During thunderstorms, avoid using telephones except cordless types. There may be a remote ris...614. Do not use this unit to report a gas leak, when in the vicinity of the leak.6SAVE THESE INSTRUCTIONS6Battery7Medical7For best performance8Base unit location/noise8Environment8Routine care8Preparation9Preparation9Connections9Connecting the AC adaptor9Note:9Connecting the telephone line cord10To connect to a 2-line telephone jack10To connect to 2 single-line telephone jacks10If you use the unit as a single-line telephone only11If you subscribe to a DSL service12Connecting a 2 line telephone jack121 2-wire telephone line cord with TRANSPARENT plugs122 4-wire telephone line cord with GREEN plugs12Connecting 2 single-line telephone jacks131 2-wire telephone line cord with TRANSPARENT plugs132 4-wire telephone line cord with GREEN plugs13Battery installation141 Insert the battery (1), and press it down until it snaps into the compartment (2).142 Close the handset cover.14Battery charge14Note:14Battery strength15Recharging the battery15Note:15Battery performance15*1 Handset is off the base unit but not in use.15Note:15Battery replacement161 Press the notch on the cover firmly and slide it as indicated by the arrow.162 Replace the old battery with a new one, and close the cover (see page 14 for battery installati...16Attention:16Controls and display17Controls17Base unit17A Hook17B LINE 1 indicator17C LINE 2 indicator17D V.M. (Voice Mail) indicator17E Antenna17F Charge contacts17G CHARGE indicator LOCATOR indicator17H {HANDSET LOCATOR}17Handset18A Speaker18B Soft key18C Headset jack18D {C} (TALK)18E Navigator key18F {s} (SP-PHONE)18G {*} (TONE)18H {HOLD}18I Ringer indicator Message indicator18J Receiver18K Display18L {OFF}18M {MENU}18N {FLASH} {CALL WAIT}18O {REDIAL} {PAUSE}18P Microphone18Q Charge contacts18Using the navigator key18Display18Handset display items18Soft keys19Soft key examples:19Backlit display and handset keypad19Setting the unit before use19Setting the dialing mode191 Press {MENU}.192 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.193 Scroll to “Set tel line” by pressing {V} or {^}, then press {Select}.194 Scroll to “Set dial mode” by pressing {V} or {^}, then press {Select}.195 Press {V} or {^} repeatedly to select the desired setting.196 Press {Save}, then press {OFF}.19Making/Answering Calls20Making/Answering Calls20Making calls201 Lift the handset and press {C}.202 Dial the phone number.203 When finished talking, press {OFF} or place the handset on the base unit.20Note:20To adjust the receiver volume20To use the speakerphone201 Lift the handset and press {s}.202 Dial the phone number.203 When the other party answers, speak into the microphone.204 When finished talking, press {OFF} or place the handset on the base unit.20Note:20To adjust the speaker volume20To dial after confirming the entered number201 Enter the phone number.202 Press {C} or {s}.203 When finished talking, press {OFF} or place the handset on the base unit.21To redial the last number dialed211 Press {C} or {s}.212 Press {REDIAL}.21To make a call using the redial list211 Press {REDIAL}.212 Press {V} or {^} repeatedly to display the desired number.213 Press {C} or {s}.21Answering calls211 Lift the handset and press {C} or {s}.212 When finished talking, press {OFF} or place the handset on the base unit.21Auto talk21Note:21Temporary ringer off21Using the other line during a conversation22To hang up the 2nd call and return to the 1st call221 Press {HOLD} to put the 1st call (LINE 1) on hold (page 23).222 Press {Line2} to make or answer a 2nd call.223 Press {OFF}, then press {Line1}.22To hold the 2nd call and return to the 1st call221 Press {HOLD} to put the 1st call (LINE 1) on hold (page 23).222 Press {Line2} to make or answer a 2nd call.223 Press {HOLD}, then press {Line} and {Line1} to return to the 1st call.22Conference calls221 Press {HOLD} to put the 1st call (LINE 1) on hold (page 23).222 Press {Line2} to make or answer a 2nd call.223 When the 2nd call is connected, press {Conf} to make a conference call.22Useful features during a call23HOLD button23Note:23Mute button23Voice enhancer231 Press {(VE)} during an outside call.232 To turn this feature on or off, press {(VE)}.23Note:23Clarity booster241 Press {MENU} during an outside call.242 Press {2} to select “Booster on” or “Booster off”.24Note:24PAUSE button (for PBX/long distance service users)241 Press {9}.242 Press {PAUSE}, then dial the phone number.243 Press {C} or {s}.24Note:24FLASH button24Note:24For Call Waiting service users25Note:25Temporary tone dialing (for rotary/pulse service users)25Note:25Handset locator251 Base unit:252 Base unit:25Phonebook26Phonebook26Using the phonebook26Adding items to the phonebook261 Press {V} or {^}.262 Press {Phonebook}.263 Press {Add}.264 Enter the name (max. 16 characters). See the character table for entry.265 Press {V}.266 Enter the phone number (max. 32 digits).267 Press {V}.268 Press {Save}.269 Press {OFF}.26Character table26To edit/correct a mistake26Note:26Calling someone in the phonebook271 Press {V} or {^}.272 Press {Phonebook}.273 Press {Search}.274 Press {V} or {^} repeatedly to display the desired item.275 Press {C}, {s}, {Line1}, or {Line2}.27Note:27To search for a name by initial271 Press {V} or {^}.272 Press {Phonebook}, then press {Search}.273 Press the dialing button ({0} to {9}, {#}, or {*}) which corresponds to the first letter you ar...274 Press {V} repeatedly to display the desired item.27Editing items in the phonebook271 Press {V} or {^}.272 Press {Phonebook}, then press {Search}.273 Press {V} or {^} repeatedly to display the desired item.274 Press {MENU}, then press {Edit}.275 Edit the name if necessary. See the character table on page 26 for character entry.276 Press {V}.277 Edit the phone number if necessary.278 Press {V}, then press {Save}.279 Press {OFF}.27Erasing items in the phonebook271 Press {V} or {^}.272 Press {Phonebook}, then press {Search}.273 Press {V} or {^} repeatedly to display the desired item.274 Press {MENU}, then press {Erase}.275 Press {Yes}.276 Press {OFF}.27Chain dial feature281 Dial from the phonebook: 1-800-012-3456 (Calling card access number).282 When prompted, dial from the phonebook: 1234 (Calling card PIN).283 When prompted, dial from the phonebook: 1-555-012-3456 (the person you want to call).281 During an outside call, press {MENU}.282 Press {1} to select “Phonebook”.283 Press {V} or {^} repeatedly to display the desired item.284 Press {Call}.28Note:28Caller ID Service29Caller ID Service29Using Caller ID service29Caller ID features29Call Waiting Caller ID display29Note:29Caller list30Missed calls30Viewing the caller list and calling back301 Press {V} or {^}.302 Press {Rcvd calls}.303 Press {V} to search from the most recent call, or press {^} to search from the oldest call.304 Press {C} or {s}.30Note:30Displayed symbols30Editing a caller’s phone number before calling back311 Press {V} or {^}.312 Press {Rcvd calls}.313 Press {V} or {^} repeatedly to display the desired item.314 Press {Edit} repeatedly until the phone number is shown in the desired format.311 Local phone number312 Area code – Local phone number313 1 – Area code – Local phone number315 To return a call, press {C} or {s}.31Caller ID number auto edit feature31Note:31Storing caller information into the phonebook321 Press {V} or {^}.322 Press {Rcvd calls}.323 Press {V} or {^} repeatedly to display the desired item.324 Press {MENU}, then press {Save}.321 Enter the name if necessary (see page 26, step 4).322 Press {V}, then press {Save}.325 Press {OFF}.32Note:32Erasing caller information32Erasing a selected item321 Press {V} or {^}.322 Press {Rcvd calls}.323 Press {V} or {^} repeatedly to display the desired item.324 Press {Erase}.32Erasing all items321 Press {V} or {^}.322 Press {Rcvd calls}.323 Press {All erase}.324 Press {Yes}.32Voice Mail Service33Voice Mail Service33Using Voice Mail service33Note:33Storing the Voice Mail (VM) access number331 Press {MENU}.332 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.333 Scroll to “Voice Mail” by pressing {V} or {^}, then press {Select}.334 Scroll to “Store VM access#” by pressing {V} or {^}, then press {Select}.335 Press {V} or {^} to select the desired line.336 Enter your access number (max. 32 digits).337 Press {Save}, then press {OFF}.33Note:33To erase the Voice Mail access number33Voice Mail (VM) tone detection33Turning VM detection on/off341 Press {MENU}.342 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.343 Scroll to “Voice Mail” by pressing {V} or {^}, then press {Select}.344 Scroll to “VM tone detect” by pressing {V} or {^}, then press {Select}.345 Select the line by pressing {V} or {^}.346 Press {V} or {^} repeatedly to select “On” or “Off”.347 Press {Save}, then press {OFF}.34Listening to Voice Mail messages341 Press {C}, {s}, {Line1}, or {Line2}, then press {VM} within 15 seconds.342 Follow the pre-recorded instructions.343 Press {OFF} when finished.34Note:34Message alert341 Press {MENU}.342 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.343 Scroll to “Message alert” by pressing {V} or {^}, then press {Select}.344 Press {V} or {^} repeatedly to select “On” or “Off”.345 Press {Save}, then press {OFF}.34Note:34Programmable Settings35Programmable Settings35Guide to handset programming35Important:35–35–35–35–35–35–35–35–35–35–35–35–35–35–35–35–35Note:35Ringer settings36Handset ringer volume361 Press {MENU}.362 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.363 Scroll to “Ringer volume” by pressing {V} or {^}, then press {Select}.364 Press {V} or {^} to select the desired line.365 Press {V} or {^} repeatedly to select the desired volume.366 Press {Save}, then press {OFF}.36Note:36Handset ringer tone361 Press {MENU}.362 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.363 Scroll to “Ringer tone” by pressing {V} or {^}, then press {Select}.364 Press {V} or {^} to select the desired line.365 Press {V} or {^} repeatedly to select the desired setting.366 Press {Save}, then press {OFF}.36Note:36Handset interrupt tone371 Press {MENU}.372 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.373 Scroll to “Interrupt tone” by pressing {V} or {^}, then press {Select}.374 Press {V} or {^} repeatedly to select the desired setting.375 Press {Save}, then press {OFF}.37Call options37Auto talk371 Press {MENU}.372 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.373 Scroll to “Auto talk” by pressing {V} or {^}, then press {Select}.374 Press {V} or {^} repeatedly to select “On” or “Off”.375 Press {Save}, then press {OFF}.37Note:37Voice enhancer381 Press {MENU}.382 Scroll to “Voice enhancer” by pressing {V} or {^}, then press {Select}.383 Press {V} or {^} repeatedly to select “On” or “Off”.384 Press {Save}, then press {OFF}.38Caller ID edit381 Press {MENU}.382 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.383 Scroll to “Caller ID edit” by pressing {V} or {^}, then press {Select}.384 Press {V} or {^} repeatedly to select “On” or “Off”.385 Press {Save}, then press {OFF}.38Display options38Handset LCD contrast381 Press {MENU}.382 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.383 Scroll to “LCD contrast” by pressing {V} or {^}, then press {Select}.384 Press {V} or {^} repeatedly to select the desired setting.385 Press {Save}, then press {OFF}.38Display language381 Press {MENU}.382 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.383 Scroll to “Change language” by pressing {V} or {^}, then press {Select}.384 Press {V} or {^} repeatedly to select the desired language.385 Press {Save} or {Salvar}, then press {OFF}.38Note:38Telephone settings39Flash time391 Press {MENU}.392 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.393 Scroll to “Set tel line” by pressing {V} or {^}, then press {Select}.394 Scroll to “Set flash time” by pressing {V} or {^}, then press {Select}.395 Press {V} or {^} to select the desired line.396 Press {V} or {^} repeatedly to select the desired setting.397 Press {Save}, then press {OFF}.39Note:39Line mode391 Press {MENU}.392 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.393 Scroll to “Set tel line” by pressing {V} or {^}, then press {Select}.394 Scroll to “Set line mode” by pressing {V} or {^}, then press {Select}.395 Press {V} or {^} to select the desired line.396 Press {V} or {^} repeatedly to select the desired setting.397 Press {Save}, then press {OFF}.39Line selection40Important:401 Press {MENU}.402 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.403 Scroll to “Set tel line” by pressing {V} or {^}, then press {Select}.404 Scroll to “Line selection” by pressing {V} or {^}, then press {Select}.405 Press {V} or {^} repeatedly to select the desired setting.406 Press {Save}, then press {OFF}.40Other options40Handset key tone401 Press {MENU}.402 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.403 Scroll to “Key tone” by pressing {V} or {^}, then press {Select}.404 Press {V} or {^} repeatedly to select “On” or “Off”.405 Press {Save}, then press {OFF}.40Re-registering the handset40Important:401 Handset:402 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.403 Scroll to “Registration” by pressing {V} or {^}, then press {Select}.404 Base unit:415 Handset:41Customer support411 Press {MENU}.412 Scroll to “Customer support” by pressing {V} or {^}, then press {Select}.413 Press {OFF}.41Programming via direct commands421 Press {MENU}.422 Enter the desired feature code (shown below).423 Enter the desired setting code (shown below).424 Press {Save}.425 Press {OFF} to exit programming mode.42Direct commands chart42Note:43Useful Information44Useful Information44Wall mounting441 Push the hook and turn it upward until it clicks into place.442 Press the tabs in the direction of the arrows (1), then remove the wall mounting adaptor (2).443 Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor, then pus...444 Connect the telephone line cord. Mount the unit, then slide it down.445 To charge the handset battery:45Headset (optional)45To connect an optional headset to the handset45Note:45Belt clip46To attach the belt clip46To remove the belt clip46Shoulder rest attachment46To attach the shoulder rest attachment46To remove the shoulder rest attachment46Error messages47Troubleshooting48General use48Programmable settings48Making/answering calls, Paging49Phonebook49Caller ID50Battery recharge51Power failure51FCC and other information52Specifications54Base unit54Operating environment:54Frequency:54Dimensions:54Mass (Weight):54Power consumption:54Power supply:54Handset54Operating environment:54Frequency:54Dimensions:54Mass (Weight):54Power supply:54Security codes:54Note:54Warranty55Customer services57Index58Index58Index58If you need assistance with setup or operation;601 Visit our website: http://www.panasonic.com/consumersupport602 Contact us via the web at: http://www.panasonic.com/contactinfo603 Call us at: 1-800-211-PANA (7262)60Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America60Panasonic Puerto Rico, Inc.60Размер: 3,0 МБСтраницы: 60Язык: EnglishПросмотреть
Справочник ПользователяСодержаниеTable of Contents2Introduction2Preparation2Making/Answering Calls2Phonebook2Caller ID Service2Voice Mail Service2Programmable Settings2Useful Information2Index3Introduction4Introduction4Accessory information5Included accessories5Additional/replacement accessories5Important safety instructions61. Read and understand all instructions.62. Follow all warnings and instructions marked on this unit.63. Unplug this unit from power outlets before cleaning. Do not use liquid or aerosol cleaners. Us...64. Do not use this unit near water, for example near a bathtub, wash bowl, kitchen sink, etc.65. Place the unit securely on a stable surface. Serious damage and/or injury may result if the un...66. Do not cover slots and openings on the unit. They are provided for ventilation and protection ...67. Use only the power source marked on the unit. If you are not sure of the type of power supplie...68. Do not place objects on the power cord. Install the unit where no one can step or trip on the ...69. Do not overload power outlets and extension cords. This can result in the risk of fire or elec...610. Never push any objects through slots in this unit. This may result in the risk of fire or ele...611. To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an autho...612. Unplug this unit from power outlets and refer servicing to an authorized service center when ...6A. When the power cord is damaged or frayed.6B. If liquid has been spilled into the unit.6C. If the unit has been exposed to rain or water.6D. If the unit does not work normally by following the operating instructions. Adjust only contro...6E. If the unit has been dropped or physically damaged.6F. If the unit exhibits a distinct change in performance.613. During thunderstorms, avoid using telephones except cordless types. There may be a remote ris...614. Do not use this unit to report a gas leak, when in the vicinity of the leak.6SAVE THESE INSTRUCTIONS6Battery7Medical7For best performance8Base unit location/noise8Environment8Routine care8Preparation9Preparation9Connections9Connecting the AC adaptor9Note:9Connecting the telephone line cord10To connect to a 2-line telephone jack10To connect to 2 single-line telephone jacks10If you use the unit as a single-line telephone only11If you subscribe to a DSL service12Connecting a 2 line telephone jack121 2-wire telephone line cord with TRANSPARENT plugs122 4-wire telephone line cord with GREEN plugs12Connecting 2 single-line telephone jacks131 2-wire telephone line cord with TRANSPARENT plugs132 4-wire telephone line cord with GREEN plugs13Battery installation141 Insert the battery (1), and press it down until it snaps into the compartment (2).142 Close the handset cover.14Battery charge14Note:14Battery strength15Recharging the battery15Note:15Battery performance15*1 Handset is off the base unit but not in use.15Note:15Battery replacement161 Press the notch on the cover firmly and slide it as indicated by the arrow.162 Replace the old battery with a new one, and close the cover (see page 14 for battery installati...16Attention:16Controls and display17Controls17Base unit17A Hook17B LINE 1 indicator17C LINE 2 indicator17D V.M. (Voice Mail) indicator17E Antenna17F Charge contacts17G CHARGE indicator LOCATOR indicator17H {HANDSET LOCATOR}17Handset18A Speaker18B Soft key18C Headset jack18D {C} (TALK)18E Navigator key18F {s} (SP-PHONE)18G {*} (TONE)18H {HOLD}18I Ringer indicator Message indicator18J Receiver18K Display18L {OFF}18M {MENU}18N {FLASH} {CALL WAIT}18O {REDIAL} {PAUSE}18P Microphone18Q Charge contacts18Using the navigator key18Display18Handset display items18Soft keys19Soft key examples:19Backlit display and handset keypad19Setting the unit before use19Setting the dialing mode191 Press {MENU}.192 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.193 Scroll to “Set tel line” by pressing {V} or {^}, then press {Select}.194 Scroll to “Set dial mode” by pressing {V} or {^}, then press {Select}.195 Press {V} or {^} repeatedly to select the desired setting.196 Press {Save}, then press {OFF}.19Making/Answering Calls20Making/Answering Calls20Making calls201 Lift the handset and press {C}.202 Dial the phone number.203 When finished talking, press {OFF} or place the handset on the base unit.20Note:20To adjust the receiver volume20To use the speakerphone201 Lift the handset and press {s}.202 Dial the phone number.203 When the other party answers, speak into the microphone.204 When finished talking, press {OFF} or place the handset on the base unit.20Note:20To adjust the speaker volume20To dial after confirming the entered number201 Enter the phone number.202 Press {C} or {s}.203 When finished talking, press {OFF} or place the handset on the base unit.21To redial the last number dialed211 Press {C} or {s}.212 Press {REDIAL}.21To make a call using the redial list211 Press {REDIAL}.212 Press {V} or {^} repeatedly to display the desired number.213 Press {C} or {s}.21Answering calls211 Lift the handset and press {C} or {s}.212 When finished talking, press {OFF} or place the handset on the base unit.21Auto talk21Note:21Temporary ringer off21Using the other line during a conversation22To hang up the 2nd call and return to the 1st call221 Press {HOLD} to put the 1st call (LINE 1) on hold (page 23).222 Press {Line2} to make or answer a 2nd call.223 Press {OFF}, then press {Line1}.22To hold the 2nd call and return to the 1st call221 Press {HOLD} to put the 1st call (LINE 1) on hold (page 23).222 Press {Line2} to make or answer a 2nd call.223 Press {HOLD}, then press {Line} and {Line1} to return to the 1st call.22Conference calls221 Press {HOLD} to put the 1st call (LINE 1) on hold (page 23).222 Press {Line2} to make or answer a 2nd call.223 When the 2nd call is connected, press {Conf} to make a conference call.22Useful features during a call23HOLD button23Note:23Mute button23Voice enhancer231 Press {(VE)} during an outside call.232 To turn this feature on or off, press {(VE)}.23Note:23Clarity booster241 Press {MENU} during an outside call.242 Press {2} to select “Booster on” or “Booster off”.24Note:24PAUSE button (for PBX/long distance service users)241 Press {9}.242 Press {PAUSE}, then dial the phone number.243 Press {C} or {s}.24Note:24FLASH button24Note:24For Call Waiting service users25Note:25Temporary tone dialing (for rotary/pulse service users)25Note:25Handset locator251 Base unit:252 Base unit:25Phonebook26Phonebook26Using the phonebook26Adding items to the phonebook261 Press {V} or {^}.262 Press {Phonebook}.263 Press {Add}.264 Enter the name (max. 16 characters). See the character table for entry.265 Press {V}.266 Enter the phone number (max. 32 digits).267 Press {V}.268 Press {Save}.269 Press {OFF}.26Character table26To edit/correct a mistake26Note:26Calling someone in the phonebook271 Press {V} or {^}.272 Press {Phonebook}.273 Press {Search}.274 Press {V} or {^} repeatedly to display the desired item.275 Press {C}, {s}, {Line1}, or {Line2}.27Note:27To search for a name by initial271 Press {V} or {^}.272 Press {Phonebook}, then press {Search}.273 Press the dialing button ({0} to {9}, {#}, or {*}) which corresponds to the first letter you ar...274 Press {V} repeatedly to display the desired item.27Editing items in the phonebook271 Press {V} or {^}.272 Press {Phonebook}, then press {Search}.273 Press {V} or {^} repeatedly to display the desired item.274 Press {MENU}, then press {Edit}.275 Edit the name if necessary. See the character table on page 26 for character entry.276 Press {V}.277 Edit the phone number if necessary.278 Press {V}, then press {Save}.279 Press {OFF}.27Erasing items in the phonebook271 Press {V} or {^}.272 Press {Phonebook}, then press {Search}.273 Press {V} or {^} repeatedly to display the desired item.274 Press {MENU}, then press {Erase}.275 Press {Yes}.276 Press {OFF}.27Chain dial feature281 Dial from the phonebook: 1-800-012-3456 (Calling card access number).282 When prompted, dial from the phonebook: 1234 (Calling card PIN).283 When prompted, dial from the phonebook: 1-555-012-3456 (the person you want to call).281 During an outside call, press {MENU}.282 Press {1} to select “Phonebook”.283 Press {V} or {^} repeatedly to display the desired item.284 Press {Call}.28Note:28Caller ID Service29Caller ID Service29Using Caller ID service29Caller ID features29Call Waiting Caller ID display29Note:29Caller list30Missed calls30Viewing the caller list and calling back301 Press {V} or {^}.302 Press {Rcvd calls}.303 Press {V} to search from the most recent call, or press {^} to search from the oldest call.304 Press {C} or {s}.30Note:30Displayed symbols30Editing a caller’s phone number before calling back311 Press {V} or {^}.312 Press {Rcvd calls}.313 Press {V} or {^} repeatedly to display the desired item.314 Press {Edit} repeatedly until the phone number is shown in the desired format.311 Local phone number312 Area code – Local phone number313 1 – Area code – Local phone number315 To return a call, press {C} or {s}.31Caller ID number auto edit feature31Note:31Storing caller information into the phonebook321 Press {V} or {^}.322 Press {Rcvd calls}.323 Press {V} or {^} repeatedly to display the desired item.324 Press {MENU}, then press {Save}.321 Enter the name if necessary (see page 26, step 4).322 Press {V}, then press {Save}.325 Press {OFF}.32Note:32Erasing caller information32Erasing a selected item321 Press {V} or {^}.322 Press {Rcvd calls}.323 Press {V} or {^} repeatedly to display the desired item.324 Press {Erase}.32Erasing all items321 Press {V} or {^}.322 Press {Rcvd calls}.323 Press {All erase}.324 Press {Yes}.32Voice Mail Service33Voice Mail Service33Using Voice Mail service33Note:33Storing the Voice Mail (VM) access number331 Press {MENU}.332 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.333 Scroll to “Voice Mail” by pressing {V} or {^}, then press {Select}.334 Scroll to “Store VM access#” by pressing {V} or {^}, then press {Select}.335 Press {V} or {^} to select the desired line.336 Enter your access number (max. 32 digits).337 Press {Save}, then press {OFF}.33Note:33To erase the Voice Mail access number33Voice Mail (VM) tone detection33Turning VM detection on/off341 Press {MENU}.342 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.343 Scroll to “Voice Mail” by pressing {V} or {^}, then press {Select}.344 Scroll to “VM tone detect” by pressing {V} or {^}, then press {Select}.345 Select the line by pressing {V} or {^}.346 Press {V} or {^} repeatedly to select “On” or “Off”.347 Press {Save}, then press {OFF}.34Listening to Voice Mail messages341 Press {C}, {s}, {Line1}, or {Line2}, then press {VM} within 15 seconds.342 Follow the pre-recorded instructions.343 Press {OFF} when finished.34Note:34Message alert341 Press {MENU}.342 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.343 Scroll to “Message alert” by pressing {V} or {^}, then press {Select}.344 Press {V} or {^} repeatedly to select “On” or “Off”.345 Press {Save}, then press {OFF}.34Note:34Programmable Settings35Programmable Settings35Guide to handset programming35Important:35–35–35–35–35–35–35–35–35–35–35–35–35–35–35–35–35Note:35Ringer settings36Handset ringer volume361 Press {MENU}.362 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.363 Scroll to “Ringer volume” by pressing {V} or {^}, then press {Select}.364 Press {V} or {^} to select the desired line.365 Press {V} or {^} repeatedly to select the desired volume.366 Press {Save}, then press {OFF}.36Note:36Handset ringer tone361 Press {MENU}.362 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.363 Scroll to “Ringer tone” by pressing {V} or {^}, then press {Select}.364 Press {V} or {^} to select the desired line.365 Press {V} or {^} repeatedly to select the desired setting.366 Press {Save}, then press {OFF}.36Note:36Handset interrupt tone371 Press {MENU}.372 Scroll to “Ringer setting” by pressing {V} or {^}, then press {Select}.373 Scroll to “Interrupt tone” by pressing {V} or {^}, then press {Select}.374 Press {V} or {^} repeatedly to select the desired setting.375 Press {Save}, then press {OFF}.37Call options37Auto talk371 Press {MENU}.372 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.373 Scroll to “Auto talk” by pressing {V} or {^}, then press {Select}.374 Press {V} or {^} repeatedly to select “On” or “Off”.375 Press {Save}, then press {OFF}.37Note:37Voice enhancer381 Press {MENU}.382 Scroll to “Voice enhancer” by pressing {V} or {^}, then press {Select}.383 Press {V} or {^} repeatedly to select “On” or “Off”.384 Press {Save}, then press {OFF}.38Caller ID edit381 Press {MENU}.382 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.383 Scroll to “Caller ID edit” by pressing {V} or {^}, then press {Select}.384 Press {V} or {^} repeatedly to select “On” or “Off”.385 Press {Save}, then press {OFF}.38Display options38Handset LCD contrast381 Press {MENU}.382 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.383 Scroll to “LCD contrast” by pressing {V} or {^}, then press {Select}.384 Press {V} or {^} repeatedly to select the desired setting.385 Press {Save}, then press {OFF}.38Display language381 Press {MENU}.382 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.383 Scroll to “Change language” by pressing {V} or {^}, then press {Select}.384 Press {V} or {^} repeatedly to select the desired language.385 Press {Save} or {Salvar}, then press {OFF}.38Note:38Telephone settings39Flash time391 Press {MENU}.392 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.393 Scroll to “Set tel line” by pressing {V} or {^}, then press {Select}.394 Scroll to “Set flash time” by pressing {V} or {^}, then press {Select}.395 Press {V} or {^} to select the desired line.396 Press {V} or {^} repeatedly to select the desired setting.397 Press {Save}, then press {OFF}.39Note:39Line mode391 Press {MENU}.392 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.393 Scroll to “Set tel line” by pressing {V} or {^}, then press {Select}.394 Scroll to “Set line mode” by pressing {V} or {^}, then press {Select}.395 Press {V} or {^} to select the desired line.396 Press {V} or {^} repeatedly to select the desired setting.397 Press {Save}, then press {OFF}.39Line selection40Important:401 Press {MENU}.402 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.403 Scroll to “Set tel line” by pressing {V} or {^}, then press {Select}.404 Scroll to “Line selection” by pressing {V} or {^}, then press {Select}.405 Press {V} or {^} repeatedly to select the desired setting.406 Press {Save}, then press {OFF}.40Other options40Handset key tone401 Press {MENU}.402 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.403 Scroll to “Key tone” by pressing {V} or {^}, then press {Select}.404 Press {V} or {^} repeatedly to select “On” or “Off”.405 Press {Save}, then press {OFF}.40Re-registering the handset40Important:401 Handset:402 Scroll to “Initial setting” by pressing {V} or {^}, then press {Select}.403 Scroll to “Registration” by pressing {V} or {^}, then press {Select}.404 Base unit:415 Handset:41Customer support411 Press {MENU}.412 Scroll to “Customer support” by pressing {V} or {^}, then press {Select}.413 Press {OFF}.41Programming via direct commands421 Press {MENU}.422 Enter the desired feature code (shown below).423 Enter the desired setting code (shown below).424 Press {Save}.425 Press {OFF} to exit programming mode.42Direct commands chart42Note:43Useful Information44Useful Information44Wall mounting441 Push the hook and turn it upward until it clicks into place.442 Press the tabs in the direction of the arrows (1), then remove the wall mounting adaptor (2).443 Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor, then pus...444 Connect the telephone line cord. Mount the unit, then slide it down.445 To charge the handset battery:45Headset (optional)45To connect an optional headset to the handset45Note:45Belt clip46To attach the belt clip46To remove the belt clip46Shoulder rest attachment46To attach the shoulder rest attachment46To remove the shoulder rest attachment46Error messages47Troubleshooting48General use48Programmable settings48Making/answering calls, Paging49Phonebook49Caller ID50Battery recharge51Power failure51FCC and other information52Specifications54Base unit54Operating environment:54Frequency:54Dimensions:54Mass (Weight):54Power consumption:54Power supply:54Handset54Operating environment:54Frequency:54Dimensions:54Mass (Weight):54Power supply:54Security codes:54Note:54Warranty55Customer services57Index58Index58Index58If you need assistance with setup or operation;601 Visit our website: http://www.panasonic.com/consumersupport602 Contact us via the web at: http://www.panasonic.com/contactinfo603 Call us at: 1-800-211-PANA (7262)60Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America60Panasonic Puerto Rico, Inc.60Размер: 3,0 МБСтраницы: 60Язык: EnglishПросмотреть