Инструкции для Pelco C2927M

Содержание

• Contents

  2
• List of Figures

  3
• Important Safety Instructions

  4
  • 1. Read these instructions.

    4
  • 2. Keep these instructions.

    4
  • 3. Heed all warnings.

    4
  • 4. Follow all instructions.

    4
  • 5. Do not use this apparatus near water.

    4
  • 6. Clean only with dry cloth.

    4
  • 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

    4
  • 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

    4
  • 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one blade wide...

    4
  • 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the points where they exit from the apparatus.

    4
  • 11. Only use attachments/accessories specified by the manufacturer.

    4
  • 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

    4
  • 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, su...

    4
  • 14. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases shall be placed on the apparatus.

    4
  • 15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

    4
  • 16. Installation should be done only by qualified personnel and conform to all local codes.

    4
  • 17. Unless this unit is specifically marked as NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture.

    4
  • 18. Use only installation methods and materials capable of supporting four times the maximum specified load.

    4
  • 19. Only use replacement parts recommended by Pelco.

    4
  • 20. Avoid touching the screen directly with your fingers as the oils from your skin may be difficult to remove from the LCD.

    4
  • 21. Do not apply direct pressure on the screen.

    4
  • 22. Keep the monitor in a dust-free environment and away from strong electromagnetic fields.

    4
  • 23. Do not use attachments, such as mounts, that are not recommended by Pelco. They may be hazardous.

    4
  • 24. Do not place the monitor on an unstable stand, bracket, or mount. The unit may fall, causing serious damage to the unit or injury to a person. Only use mounts recommended by Pelco.

    4
  • 25. A CCC-approved power cord must be used to power this equipment when used in China.

    4
• Regulatory Notices

  5
  • RADIO AND TELEVISION INTERFERENCE

    5
• Description

  6
  • Models

    6
  • Package Contents

    7
    • Figure 1. Parts List Illustration

      7
• Installation

  8
  • DeskTop Stand

    8
  • Rear Panel Connectors

    8
    • Figure 2. Rear Panel Connectors

      8
      • 1. AC IN: This can be connected to a 100-240 VAC, 50/60 Hz source.

        8
      • 2. DC OUT: This connection can output 12 VDC, 0.5 A (continuous), 50/60 Hz.

        8
      • 3. DC IN: This can be connected to an external 12 VDC, 5 A source.

        8
      • 4. VGA IN: This can be connected to the VGA cable (supplied).

        8
      • 5. DVI IN: This can be connected to the DVI cable (supplied).

        9
      • 6. USB: This is the USB-A 2.0 downstream port. It can be used to connect to such peripherals as a USB camera or USB key.

        9
      • 7. USB: This is the USB-A 2.0 downstream dual port. It can be used to connect to such peripherals as a USB camera or USB key.

        9
      • 8. USB: This is the USB-B 2.0 upstream port. It can be used to connect to a PC using the USB cable (supplied).

        9
      • 9. S-VIDEO IN: This connection can bring in an S-video signal by DIN socket.

        9
      • 10. S-VIDEO OUT: This connection can output an S-video signal by DIN socket. This socket is the loop-through output (maximum of one looping operation only is recommended).

        9
      • 11. AUDIO IN: These RCA sockets can be connected to audio outputs (White terminal, Reed terminal).

        9
      • 12. AUDIO OUT: These RCA sockets can output sound to other speakers. This socket is the loop-through output.

        9
      • 13. VIDEO 1 IN/OUT: The IN BNC socket can be connected to a composite video output. The OUT BNC socket is the loop-through output. The input is automatically terminated if the loop-through output is not used.

        9
      • 14. VIDEO 2 IN/OUT: The IN BNC socket can be connected to a composite video output. The OUT BNC socket is the loop-through output. The input is automatically terminated if the loop-through output is not used.

        9
      • 15. Speakers: The unit has two built-in speakers.

        9
  • Video And Power Connections

    9
    • 1. Connect the video cable. (Refer to Table A for video coaxial requirements.)

      9
      • a. Connect video cables as follows, depending on the input source.

        9
      • b. If you intend on using the PIP feature, you can connect video inputs in any of the following combinations:

        10
      • c. Looping operation only. Connect a video cable to the BNC video connector labeled VIDEO 1 OUT for composite video or connect t...

        10
    • 2. Connect peripherals, as desired. Connect USB cables to the downstream USB ports on the back of the monitor (refer to callot numbers 6 and 7 in Figure 2).

      10
    • 3. Connect to a PC, as desired. Connect a USB cable (supplied) to the upstream USB port on the back of the monitor (refer to callout number 8 in Figure 2).

      10
    • 4. Connect audio, as desired. The monitor has built-in speakers but can also loop out to an external speaker. Connect the audio ...

      10
    • 5. Connect power. Do one of the following:

      10
    • Table A. Video Coaxial Cable Requirements

      10
      • Figure 3. Looping Operation: One Monitor with External Video Equipment

        11
      • Figure 4. Looping Operation: Maximum of Three Monitors with External Video Equipment

        11
• Operation

  12
  • Installing Remote Control Batteries

    12
    • Figure 5. Battery Installation

      12
      • 1. Open and remove the battery cover on the back of the remote control.

        12
      • 2. Install two AA size batteries (supplied). Match the + and - signs on the batteries to the signs on the battery compartment.

        12
      • 3. Close the battery cover. Make sure the lock snaps closed.

        12
  • Front Panel Controls

    13
    • Figure 6. Front Panel Controls

      13
      • 1. This button selects the input signal and swaps the main and PIP displays when PIP is active.

        13
      • 2. This button decreases the value of a selected menu item and accesses the brightness control when no PIP or menu is active. It can reposition PIP when PIP is active.

        13
      • 3. This button increases the value of a selected menu item, and it enables or disables PIP when no menu is active.

        13
      • 4. This button moves the highlighter downward through a menu.

        13
      • 5. This button moves the highlighter upward through a menu.

        13
      • 6. This menu button opens the main menu when no menu is active, and it selects a highlighted menu item when a menu is active.

        13
      • 7. This button turns on or off power to the monitor.

        13
      • 8. This is the infrared sensor for the remote control unit.

        13
  • Remote Control Functions

    14
    • Figure 7. Remote Control Functions

      14
      • 1. This button turns on or off power to the monitor.

        14
      • 2. This button selects the previous channel.

        14
      • 3. This button selects the next channel.

        14
      • 4. This button increases the audio volume.

        14
      • 5. This button decreases the audio volume.

        14
      • 6. This button moves the PIP location to the next location (upper left, upper right, lower right, lower left, middle).

        14
      • 7. This button swaps the PIP image with the main image and vice versa.

        14
      • 8. This button selects the PIP function.

        14
      • 9. This button moves the highlighter upward through a menu.

        14
      • 10. This button decreases the value of a selected menu item.

        14
      • 11. This button enters the OSD menu and submenus, and it selects items.

        14
      • 12. This button moves the highlighter downward through a menu.

        14
      • 13. This button increases the value of a selected menu item.

        14
  • OSD Control Menus

    15
    • 1. Press the menu button to access the Main menu.

      15
    • 2. Use the up and down arrow buttons to highlight a selection.

      15
    • 3. Press the menu button to select an item.

      15
    • 4. Use the left and right arrow buttons to adjust the setting on a selected item.

      15
    • Video Menu (Video Mode)

      15
      • Figure 8. Video Menu (Video Mode)

        15
      • Video Menu (Video Mode) Field Definitions

        15
    • Video Menu (VGA Mode)

      16
      • Figure 9. Video Menu (VGA Mode)

        16
      • Video Menu (VGA Mode) Field Definitions

        16
    • Audio Menu

      16
      • Figure 10. Audio Menu

        16
      • Audio Menu Field Definitions

        16
    • Screen Menu (Video Mode)

      16
      • Figure 11. Screen Menu (Video Mode)

        16
      • Screen Menu (Video Mode) Field Definitions

        16
    • Screen Menu (VGA Mode)

      17
      • Figure 12. Screen Menu (VGA Mode)

        17
      • Screen Menu (VGA Mode) Field Definitions

        17
    • Source Menu (Video Mode)

      17
      • Figure 13. Source Menu (Video Mode)

        17
      • Source Menu (Video Mode) Field Definitions

        17
    • Source Menu (VGA Mode)

      18
      • Figure 14. Source Menu (VGA Mode)

        18
      • Source Menu (VGA Mode) Field Definitions

        18
    • Option Menu

      18
      • Figure 15. Option Menu

        18
      • Option Menu Field Definitions

        18
  • Menu Default Values

    19
  • Maintenance

    19
    • Cleaning

      19
• Supported Input Modes

  20
• Specifications

  21