Инструкции для Pelco HS2100

Содержание

• Important Safety Instructions

  2
  • 1. Installation and servicing should be done only by qualified service personnel and conform to all Local codes.

    2
  • 2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture.

    2
  • 3. Only use replacement parts recommended by Pelco.

    2
  • 4. After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed parts have not been connected to line circuitry.

    2
  • 5. The installation method and materials should be capable of supporting four times the weight of the enclosure, pan/tilt, camera and lens combination.

    2
  • Description

    2
    • Optional accessory

      2
• Installation

  3
  • Recommended Tools

    3
  • Back Box Installation

    3
    • 1. Determine the location and direction of the enclosure to be mounted. Ideally, the enclosure cutout should be parallel and adjacent, or perpendicular, to any ceiling structure. Avoid cutting into any ceiling structural members.

      3
    • 2. Unlock the enclosure cover by unscrewing the tamper-resistant screw (pin-in-hex wrench is included to remove tamper-resistant screw). Open the cover to expose the mounting holes in the flange.

      3
    • 3. Remove any appropriate knockouts.

      3
    • 4. Insert the enclosure into the opening and secure with the appropriate fasteners.

      3
  • Camera and Lens Installation

    3
    • 1. Mount the camera and lens onto the adjustable camera cradle. Adjust the position of the camera and lens to clear the enclosure cover when closed. Tighten the camera cradle fasteners.

      3
    • 2. Route the appropriate cables into the enclosure. Make all necessary electrical connections. Refer to Table A for the type of video coaxial cable to use. If the camera will use 24 VAC power, refer to Table B to determine the size of wire needed.

      3
    • 3. Close and lock the cover with the provided tamper-resistant screw.

      3
    • Table A. Video Coaxial Cable Wiring Distances

      4
    • Table B. 24 VAC Wiring Distances

      4
• Maintenance

  5
• Specifications

  6