Инструкции для Toshiba E6581830

Содержание

• 1. Overview

  5
• 2. Basic specifications

  5
  • 2.1. CC-Link Version

    6
    • 2.1.1. CC-Link Ver. 1.10

      6
    • 2.1.2. CC-Link Ver. 2

      6
• 3. Names and functions

  7
  • 3.1. Outline

    7
• 4. Installation on inverter

  8
  • 4.1. Connection cable

    8
  • 4.2. Terminating resistor

    8
  • 4.3. Connection of CC-Link master unit and inverter

    9
  • 4.4. The maximum connection number of units

    10
  • 4.5. LED indicator

    12
• 5. Functions

  13
  • 5.1. Initial setting

    13
  • 5.2. Communication parameters for CCL003Z

    14
  • 5.3. CC-Link function setting

    15
    • 5.3.1. Station number setting

      15
    • 5.3.2. Baud rate setting

      15
    • 5.3.3. CC-Link extended setting

      16
  • 5.4. Basic functions

    17
    • 5.4.1. Run and frequency operation command

      17
    • 5.4.2. Monitor

      17
    • 5.4.3. Writing and reading the parameter

      17
  • 5.5. I/O signal list

    18
    • 5.5.1. One station is occupied (CC-Link Ver.1) (c122=0)

      18
    • 5.5.2. Double setting is selected (CC-Link Ver.2) (c122=1)

      19
    • 5.5.3. Quadruple setting is selected (CC-Link Ver.2) (c122=2)

      19
    • 5.5.4. Octuple setting is selected (CC-Link Ver.2) (c122=3)

      20
    • 5.5.5. Trip history

      21
    • 5.5.6. Detail of input and output signals

      22
    • 5.5.7. Remote Register Assignment

      25
    • 5.5.8. Instruction Codes

      29
    • 5.5.9. The details of an error code

      31
    • 5.5.10. Description of reply code

      33
    • 5.5.11. Description of monitor code

      34
    • 5.5.12. Description of input terminal information

      35
    • 5.5.13. Description of output terminal information

      35
• 6. Programming examples

  36
  • 6.1. Program example for reading the inverter status

    39
  • 6.2. Program example for setting the operation mode

    40
  • 6.3. Program example for setting the operation commands

    41
  • 6.4. Program example for setting the running frequency

    41
  • 6.5. Program example for monitoring the output frequency

    42
  • 6.6. Program example for parameter writing

    43
  • 6.7. Program example for parameter reading

    44
  • 6.8. Program example for trip information reading

    45
  • 6.9. Program example for resetting the inverter at inverter error

    46
  • 6.10. Instructions

    47
• 7. Unusual diagnosis

  48
  • 7.1. Option error

    48
  • 7.2. Disconnection error of network cable

    48
  • 7.3. How to check the error using the LEDs

    49