Справочник ПользователяСодержаниеP-660R-D Series1ADSL2+ Access Router1Quick Start Guide1Version 3.40110/20051Overview21 Hardware Connections21 DSL: Connect the Prestige to a telephone jack using a telephone wire.32 LAN 10/100M: Use an Ethernet cable to connect a computer to the LAN port for initial configuration and/or Internet access.33 POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source.32 Configuration for Internet Access32.1 Configuration Genie52.2 Zero Configuration52.3 Web Configurator Internet Access Wizard62.3.1 Accessing the Web Configurator61 Launch your web browser. Enter “192.168.1.1” as the web site address.62 Click Login.63 Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore. You then see the main web configurator screen.64 In the Site Map screen, click Wizard Setup.72.3.2 Internet Access Setup81 Configure the Internet access settings in this step. The wizard screens vary depending on the Mode and Encapsulation you chose in the first wizard screen.8A) Select Routing if your ISP gave you an IP address and allows multiple computers to share an Internet account. Otherwise, select Bridge. Then select RFC 1483.8B) Click Next.8C) If you selected Routing, enter the IP address given by your ISP.9D) If you selected Routing, select SUA Only when you have one public IP address, Full Feature when you have more than one public IP address (for translation) or None to disable NAT.9E) Click Next.9A) Select Routing, then ENET ENCAP.9B) Click Next.9C) If your ISP gave you an IP address, subnet mask and gateway address, select Static IP address and enter them. Otherwise, select Obtain an IP Address Automatically.9D) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT.10E) Click Next.10A) Select Routing, then PPPoE.10B) Click Next.10C) Enter the service name, username and password given by your ISP.10D) If your ISP gave you an IP address, select Static IP address and enter it. Otherwise, select Obtain an IP Address Automatically.10E) Select Nailed-Up Connection to have your connection up all the time. Otherwise, select Connect on Demand and specify an idle time-out period (in seconds) in the Max. Idle Timeout field.11F) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT.11G) Click Next.11A) Select Routing if your ISP allows multiple computer s to share an Internet account. Otherwis e, select Bridge. Then select PPPoA.11B) Click Next.12C) Enter the username and password given by your ISP.12D) If your ISP gave you an IP address, select Static IP address and enter it. Otherwise, select Obtain an IP Address Automatically.12E) Select Nailed-Up Connection to have your connection up all the time. Otherwise, select Connect on Demand and specify an idle time-out period (in seconds) in the Max. Idle Timeout field.12F) If you selected Routing, select SUA Only when you have one public IP address, Full Feature when you have more than one public IP address (for translation) or None to disable NAT.12G) Click Next.122 Verify your LAN and WAN settings and click Save Settings.133 The Prestige automati cally tests the connectio n to the computer(s) connected to the LAN port. To test the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the main screen.133 NAT141 Click Advanced Setup and then NAT to open the NAT- Mode screen. Select SUA Only if you have one public IP address and Full Feature if you have multiple public IP addresses (for address translation).142 If you have servers on your LAN, configure an SUA server set to have them visible to the outside. From the NAT - Mode screen click Edit Details and fill in the fields as shown.144 Troubleshooting154.1 Set Up Your Computer’s IP Address171 In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.172 In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up Connections.173 Right-click Local Area Connection and then click Properties.174 Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click Properties.185 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP).186 Select the Obtain an IP address automatically and Obtain DNS server address automatically options.187 Click OK to close the Internet Protocol (TCP/IP) Properties window.188 Click Close (OK in Windows 2000/ NT) to close the Local Area Connection Properties window.189 Close the Network Connections screen.18Viewing Your Product’s Certifications181 Go to www.zyxel.com.182 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.183 Select the certification you wish to view from this page.18Размер: 1,2 МБСтраницы: 18Язык: EnglishПросмотреть
