Accusplit AH120M9 用户手册

REPLACING THE BATTERY

1. When the figures on the display start to blink, it is

    time to replace the battery.
  2. The unit uses one Type CR2032 3-volt lithium battery.
  3. Insert a coin into the slot at the bottom of the body

case. Twist the coin to remove the front case.
4. Locate the BATTERY HOLDING PLATE at the bottom

left corner of the inside case. Remove the plate by

loosening the two small screws with a small Phillips

head screwdriver.
5. Take out the old battery and replace it with a new

battery. Place the battery’s positive (+) terminal

FACE UP while you install it into the pedometer.

CLEARING THE MEMORIES

Auto Reset: At 3:50 AM every day, the previous day’s STEP

record is automatically saved and STEP display resets to 0.

You do not need to press the RESET button every day.
Manual Reset: To reset today’s STEP data to 0, press and

hold the yellow RESET button for 2 seconds. Note: Resetting

today’s steps before automatic nightly rollover prevents them

from being tallied in memory.
System Reset: To reset all memories to 0 (including the clock),

press the recessed SYSTEM RESET button in the lower left

corner of the front of the display. (Use a pen or the end of

a paper clip.) Note: In case of irregular display due to static

electricity, pressing the SYSTEM RESET button, and then

resetting the CLOCK, will return the unit to normal.

Terminal

Screws

NO-PROOF-OF-PURCHASE LIMITED WARRANTY

Free service for first year of ownership;

$12 fee for service thereafter. See label inside unit for date.

See www.accusplit.com/support for details

and back case together, then pressing the bottom of

the case together. If the two halves don’t go together

easily, check if the front case is upside down!
7. Reset the CLOCK to restore all functions to your

pedometer.

CAUTION: Please DO NOT TOUCH inner pedometer parts,

other than battery. Touching the sensor mechanism may

affect the accuracy of the pedometer.
6. Reinstall the BATTERY HOLDING PLATE

by tightening the two

screws. Put the case

back together by

matching the

top edges of

the front case