Precor CW34870-101 用户手册

 

Getting Started 

Note: Assemble the weight stack shroud and bottle holder/accessory 
tray after the equipment is positioned in the facility.   

Assembly takes about 15 minutes to complete. If this is the first time 
you have assembled this type of equipment, allow more time. 

Open the box and remove the packing materials. 

Before you begin installing the weight stack shroud assembly, verify 
that you have received the following parts: 

For Weight Stack Shroud Assembly 

y

 

One front shroud assembly (CW34198) 

y

 

One pulley cover (CW34012) 

y

 

One lower left corner cover (CW34343)   

y

 

One lower right corner cover (CW34343)   

y

 

One pulley plug cover (CW34013) 

y

 

One lower middle cover (CW33945) 

y

 

One lower back cover (CW33944) 

y

 

One upper back cover (CW34376) 

y

 

One top cover (CW33947) 

y

 

One adjustable foot (CW39916-102) 

y

 

One foot cover with 75-degree upper opening (front, CW34061-103; 
back, CW34061-104) 

y

 

Two #8 x 1

¹⁄₄” Phillips-head self-tapping screws 

y

 

Ten

 ¹⁄₄”- 20 buttonhead screws 

y

 

Two #8 x 

⁵₈" Phillips-head self-tapping screws 

For Attaching Bottle Holder/Accessory Tray 

y

 

One bottle holder/accessory tray (CW34368) 

y

 

One U-shaped bottle holder bracket (CW34364) 

y

 

Two #8 - 32 machine screws 

y

 

Two custom bolts 

y

 

Two lock washers 

y

 

Two flat washers 

y

 

Two 

³₈” - 16 low head bolts 

y

 

One 

⁵₃₂” hex key 

y

 

One 

³₁₆” hex key 

y

 

One 

¹₄” hex key 

y

 

One 

⁹⁄₁₆” socket wrench 

y

 

One 

³₄” open-end or box-end wrench 

y

 

One 1”open-end or box-end wrench 

y

 

One #2

 Phillips screwdriver