Philips 6800 用户手册

下载
页码 52
17
Philips Lifeline 6900/6800/AT Series User’s Manual
Comm
unicator
Cleaning Your  Communicator
Keep the Communicator free of dust by wiping it with a soft 
cotton cloth. If additional cleaning is required, follow the steps 
below: 
1. 
Turn the POWER switch OFF, and unplug the power cord 
from the electrical outlet. Unplug the telephone cord from 
the wall jack. Note:  You cannot use your Lifeline Service to 
call for help while the Communicator is turned off or the 
telephone cord is disconnected.  Accordingly, you may wish 
to have a family member or caregiver present while you are 
cleaning your Communicator. 
2. 
Slightly dampen a soft cloth with a mild all-purpose cleaner 
and gently wipe surfaces clean. Do not use detergent or 
abrasive cleaners on your Communicator. 
3. 
Reconnect the power cord to the electrical outlet, reconnect 
the telephone cord to the wall jack, and then turn the 
POWER switch back ON. 
4. 
Test your system by pressing your Personal Help Button 
and speaking through the Communicator with the Response 
Center. 
Caution:  
Do not use spray cleaners directly on your 
Communicator. Excessive moisture could get inside the unit and 
cause damage. 
Communicator Battery
Your Communicator uses a factory-installed battery located in the 
battery compartment beneath the unit.  This battery will provide 
up to 30 hours of backup should you lose power. Lifeline will 
notify you if this battery needs to be replaced.