Bushnell 98-2307/10-10 用户手册

•  Loosen the knob (A) at the base of the collapsible 

tripod legs. Unfold the legs fully and set the tripod on a 
stable, level surface such as a table or the ground. 

•  Make sure the upper section of the tripod is level and 

securely attached to the top plate (B) of the lower 
section, by tightening the C-clamp bolt (C). 

•  Turn the mounting screw knob (D) to attach the scope’s 

mounting base securely to the tripod platform (E) (do 
not overtighten).

•  Twist the pan/tilt handle (F) counter-clockwise to 

loosen it, tilt the tripod head until the mounting 
platform is level with the ground, then twist the handle 
clockwise to tighten it. 

•  To tilt the scope vertically, twist the pan/tilt handle 

counter-clockwise to loosen it first, then tilt the tripod 
head up or down. To pan the scope left or right, loosen 
the pan lock knob first, then use the pan/tilt handle to rotate the tripod platform. 

•  The top section of the mini tripod may also be used as a car window mount. Loosen the 

C-clamp bolt (C), and remove the top section. Roll down your window partially, leaving 
enough of it up to place the C-clamp on, with the bolt knob facing you. Tighten the knob to 
secure the mount in place, being careful not to cause damage to the window (avoid using the 
mount on windows with significant curvature).