Impex AB 4000 用户手册

 
Tools Required to Assemble the Machine:  Two Adjustable Wrenches and Allen Wrenches 
NOTE:  It is strongly recommended this machine be assembled by two or more people to 
avoid possible injury. 
 
STEP 1     (See Diagram 1) 
A.)  Attach the Main Frame (#1) to the Front Stabilizer (#2). Align the holes and secure it with three 

M10 x 5/8” Allen Bolts (#31) and 

∅

 ¾” Washers (#39).  

B.)  Attach the Main Frame (#1) to the Rear Stabilizer (#3).  Align the holes and secure it with two 

M10 x 5/8” Allen Bolts (#31) and 

∅

 ¾” Washers (#39). 

C.)  Slide the Sliding Block (#9) onto the Incline Adjustment Bar (#10). Align the holes then thread in 

a Knob Lock (#20) to hold the Sliding Block in position.  

D.)  Push two Bushings (#23) into the Incline Adjustment Bar (#10). Then attach the Bushings and 

the Bar to the bracket on the Main Frame (#1). Secure it with a M10 x 3” Allen Bolt (#33), two 

∅

 

¾” Washers (#39), and one M10 Aircraft Nut (#41).   

E.)  Attach two Bushings (#23) to the side of Main Frame (#1). Attach two Bushings (#23) to the 

pivot on top of the Main Frame (#1). Attach two Bushings (#23) to the pivot on the Sliding Block 
(#9).