Xerox 3100MFP/S 用户手册

- 7 -

Before turning on your device, check that the outlet that you are going to plug it into conforms to the indications shown 
on the information plate (voltage, current, power network frequency) located on your device. This device shall be 
connected to a single phase power network. The device shall not be installed on bare ground.

Batteries and rechargeable batteries, packaging and electric and electronic equipment (EEE), shall be thrown away, 
as specified by the Instructions of the ENVIRONMENT chapter of this manual.

Because of the device model, the power connector is the only way to disconnecting the device from the power network, 
that is why it is imperative to apply the following safety measures: your device shall be connected to a power outlet 
located nearby. The outlet shall be easily accessible.

Your device is delivered with a grounded power cord. It is imperative to connect a grounded connector to a grounded 
outlet connected to the building earthing.

For installation conditions and safe use precautions, refer to chapter Installation, page 11.

Repairs-maintenance: Repairs and maintenance should only be carried out by a 
qualified technician. There are no serviceable parts inside the machine. To reduce 
the risk of electrical shock, you shall not proceed with these operations yourself, 
because by opening or removing the covers, you could expose yourself to two 
hazards:

- The laser beam can cause irreversible eye damage.
- Avoid contact with powered parts because it can lead to electrical shock with 

unfortunate consequences.