Xerox 3100MFP/S 用户手册

- 19 -

1 Make sure that the On/Off switch is on Off 

(O position). 

2 Connect the power cord to the device. 

 

Plug the power cord into the wall outlet.

 

 

3 Press the On/Off button to turn on the device 

(I position).

After a few seconds, when the machine has warmed up, 
the Easy Install function is launched and the LCD screen 
displays the following message:

The Easy Install function will help you configure your 
machine by guiding you through the basic settings.

If you wish to modify the setting displayed, press the OK 
button. If you do not want to modify the displayed setting, 
press the C button: the Easy Install function then 
displays the next basic setting.

1 To modify the display language, press the OK 

button.

2 Select the desired language using the   or   

buttons and confirm with OK.

The setup is now complete and the functions list is 
automatically printed out.

The LCD screen displays the message P

 if no 

paper has been loaded in the paper tray (see Loading 
paper in the main paper tray, page 13). Once paper has 
been loaded, printing will resume.

The manual feed tray allows you to use a greater variety 
of weights and sizes than those used in the main paper 
tray (refer to Specifications, page 50).

Only one sheet or envelope can be fed at a time.

1 Spread the manual feed guides to the maximum.

2 Insert a sheet or an envelope in the manual feed 

tray.

3 Adjust the paper guides against the right and left 

edges of the sheet or the envelope.

4 Print making sure that the chosen paper size 

corresponds to the selected format on the printer 
(refer to Copy, page 21).

Before plugging the power cord, it 
is imperative to refer to the 
Security directives, page 7.

To manually modify and customise the 
machine settings, refer to 
Parameters/Setup, page 25.

Before loading paper, refer to the 
paragraph Paper 
recommendations, page 13.