Xerox 3100MFP/S 用户手册

- 25 -

This setting enables you to choose the menu language of 
your choice. By default, the machine is set to English.

To select the language:

1 Press  , enter 203 using the keypad.
2 Select the required language using   and  , then 

press the OK key to confirm.

3 To exit this menu, press 

.

As delivered your machine is preset by default. However, 
you may adjust it to meet your requirements by resetting 
the technical parameters.

To set the technical parameters:

1 Press  , enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.
3 With the keys   or  , modify the parameter 

settings by following the table below and press OK.

Press  , enter 51 using the keypad.

The printing of the functions guide starts.

To print the list of setups:

Press  , enter 56 using the keypad.

Your machine is continuously being 
updated, new functions are regularly 
made available.
To benefit, visit our website 
www.xerox.com. You can also use the 
update function available with the 
Xerox Companion Suite software to 
download the latest online updates 
(see Firmware update, page 49).

Choosing the printer standby 
delay: the printer will switch to 
standby after a delay (in minutes) 
of NON-operation or during the 
period of time of your choice.

Note: you can also access this 
parameter by pressing the 

 key from the idle screen.

Makes printing lighter to save toner 
cartridge ink.

RAW network print port 
connection.

Time-out before document being 
printed is deleted following a print 
error in PC print mode.

Wait time-out for data from PC 
before the task is deleted in PC 
print.

Page size change. This parameter 
allows you to print a LETTER size 
document on A4 pages using the 
LETTER/A4 setting.

Number of WEP keys allowed 
(from 1 to 4).