Hitachi 19VR11B 用户手册

TIMER 

 

53

1) Press POWER button so that the REC indicator goes off. 
2) Press MENU button to point to "TIMER PROGRAMMING". 
3) Press SELECT button. 
4) Select a program number you want to check using CH 

 or 

 button. The details of 

selected program appears on the TV screen. 
5) Press MENU button. The TV screen returns to the TV mode. 

• Make sure the channel you want to record is properly set in advance. 
• It is not necessary to press REC button for timer recording. 
• Recording begins automatically at the set of the Start time. 
• If you are recording using a Timer mode, you may not operate the unit manually. 
• The erase-prevention tab on the cassette must be in place (or you must put tape over the 
hole). 
• If the erase protection tab is removed, the cassette will be ejected when the POWER button 
is pressed to off. 

• If the tape runs out before the end time, the TV/VCR will switch to the Stop mode 
immediately, and the tape will be ejected. 

With this feature, after timer recording has finished, the beginning of the recorded 
program(s) can be located automatically. 

1 Select "USER'S SET UP" 

 

Press MENU button repeatedly to point to "USER'S SET UP". 
Press SELECT button. 

2 Set "AUTO RETURN" to [ON] 

 

Press MENU button repeatedly to point to "AUTO RETURN". 
Press CH 

 or 

 button repeatedly until [ON] appears. 

3 Exit the auto return mode 
Press MENU button repeatedly to return to the TV mode. 

4 Auto Return will begin 
When all the timer recordings are completed, the TV/VCR will rewind to the 
beginning of the recorded program(s). 

NOTES: 
• If you press POWER button during rewinding a tape, the Auto Return will be stopped. 
• The Counter Memory function does not operate in this mode.