Pelco C2223M 用户手册
4
C2223M (1/06)
2.
Thread the 24 VAC power, video (coax or UTP), and control wiring through the large access hole
in the adapter plate. Then attach the adapter plate to the mounting surface using either the
top/bottom or left/right pair of mounting holes. (The top/bottom pair is shown in Figure 2.)
in the adapter plate. Then attach the adapter plate to the mounting surface using either the
top/bottom or left/right pair of mounting holes. (The top/bottom pair is shown in Figure 2.)
NOTE:
If mounting to anything other than a junction box, please select appropriate mounting
hardware for the mounting surface
Figure 2.
Mounting the Adapter Plate