Brinkmann S810I 用户手册
C 41
C 40
If you are continuing from the Measure mode, press OK.
Or, if you are starting from the Time of Day display, press and hold OK.
Or, if you are starting from the Time of Day display, press and hold OK.
If BasicUse exercise starts, even if you have set an exercise profile on please
check that you have set at least one of the exercise profile functions on.
check that you have set at least one of the exercise profile functions on.
Exercise information will be stored in an exercise file only when the
stopwatch is running. The ongoing recording is indicated with a graphic
bar that runs continuously on the display.
stopwatch is running. The ongoing recording is indicated with a graphic
bar that runs continuously on the display.
If there is 00 / - - reading on the display, there is no heart rate reception.
Bring the wrist receiver up to your chest near the transmitter’s Polar logo.
The receiver will look for another heart rate signal.
Bring the wrist receiver up to your chest near the transmitter’s Polar logo.
The receiver will look for another heart rate signal.
At the start of your workout, exercise time is displayed in minutes and
seconds. When you have exercised more than 60 minutes, exercise time
is displayed in hours and minutes.
seconds. When you have exercised more than 60 minutes, exercise time
is displayed in hours and minutes.
Turning the heart rate zone alarm on/off
Press and hold the signal/light button. When appears on the display the
zone alarm is on. A beeping noise will sound with each heart beat to alert
you that your heart rate is outside the set limits. If you do not want to use
the zone alarm the flashing heart rate reading indicates if your heart rate is
outside the limits. This function can be used if you have turned on heart rate
limits in Profile and BasicSet exercises.
Press and hold the signal/light button. When appears on the display the
zone alarm is on. A beeping noise will sound with each heart beat to alert
you that your heart rate is outside the set limits. If you do not want to use
the zone alarm the flashing heart rate reading indicates if your heart rate is
outside the limits. This function can be used if you have turned on heart rate
limits in Profile and BasicSet exercises.
In addition to the alarm you can see:
if you are exercising above heart rate zone.
if you are exercising below heart rate zone.
if you are exercising below heart rate zone.
3. Start from the Time of Day display by pressing the OK to start measuring
your heart rate. A heart symbol will start flashing and your heart rate in
beats per minute will appear in max. 15 seconds. The frame around the
heart symbol indicates that the heart rate reception is coded. The
receiver returns automatically to the Time of Day display within
5 minutes if there is no heart rate reception.
beats per minute will appear in max. 15 seconds. The frame around the
heart symbol indicates that the heart rate reception is coded. The
receiver returns automatically to the Time of Day display within
5 minutes if there is no heart rate reception.
The following displays start to alternate as you enter the Measure mode:
Exercise name
Profiles (E1-E7),
BasicSet(E8) or
BasicUse (E0)
BasicSet(E8) or
BasicUse (E0)
Online* measurement to
the computer is on
the computer is on
*To use this function you need an optional Polar IR Interface.
Memory left
Recording rate
Time of Day
Current
heart rate
heart rate
Exercise Recording Mode
S810i manual USA GBR A.pm6
29.7.2002, 14:14
40-41