DirecTV RC65 用户手册
12
3.
Using the number keys, enter 9-9-3. (The green light
flashes twice.)
flashes twice.)
4.
Press and release the SELECT key. (The green light
flashes twice.)
flashes twice.)
NOTE:
DIRECTV
®
Receivers don’t have volume control,
so the remote will not allow the user to lock vol-
ume to the DIRECTV mode.
ume to the DIRECTV mode.
RESTORING FACTORY DEFAULT SETTINGS
To reset all the functions of the remote control to the
factory defaults (the original, out-of-the-box settings),
follow these steps:
1.
factory defaults (the original, out-of-the-box settings),
follow these steps:
1.
Press and hold the MUTE and SELECT keys at the same
time until the green light flashes twice, then release
both keys.
time until the green light flashes twice, then release
both keys.
2.
Using the number keys, enter 9-8-1. (The green light
flashes 4 times.)
flashes 4 times.)
TROUBLESHOOTING
PROBLEM: Light at the top of the remote blinks when you
press a key, but the component does not respond.
SOLUTION 1: Try replacing the batteries (see page 7).
SOLUTION 2: Make sure you are aiming the DIRECTV
press a key, but the component does not respond.
SOLUTION 1: Try replacing the batteries (see page 7).
SOLUTION 2: Make sure you are aiming the DIRECTV
®
Universal Remote Control at your home entertainment
component and that you are within 15 feet of the
component you are trying to control.
PROBLEM: The DIRECTV Universal Remote Control does
not control component or commands are not recognized
properly.
SOLUTION: Try all listed codes for the device brand being
set up. Make sure all components can be operated with an
infrared remote control.
PROBLEM: TV/VCR combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo
units may require both a TV code and a VCR code for full
operation (see page 8).
PROBLEM: CHAN
component and that you are within 15 feet of the
component you are trying to control.
PROBLEM: The DIRECTV Universal Remote Control does
not control component or commands are not recognized
properly.
SOLUTION: Try all listed codes for the device brand being
set up. Make sure all components can be operated with an
infrared remote control.
PROBLEM: TV/VCR combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo
units may require both a TV code and a VCR code for full
operation (see page 8).
PROBLEM: CHAN
S
, CHAN
T
, and PREV do not work for
your RCA TV.
SOLUTION: Due to RCA design for certain models (1983-
1987), only the original remote control will operate these
functions.
PROBLEM: Changing channels does not work properly.
SOLUTION: If original remote control required pressing
ENTER to change channels, press ENTER on the DIRECTV
Universal remote control after entering a channel number.
SOLUTION: Due to RCA design for certain models (1983-
1987), only the original remote control will operate these
functions.
PROBLEM: Changing channels does not work properly.
SOLUTION: If original remote control required pressing
ENTER to change channels, press ENTER on the DIRECTV
Universal remote control after entering a channel number.
PROBLEM: Remote control does not turn on Sony or Sharp TV/
VCR Combo.
SOLUTION: For power on, these products require setting up TV
codes on the remote control. For Sony, use TV code 10000 and
VCR code 20032. For Sharp, use TV code 10093 and VCR code
20048. (See “Controlling Other Components” on page 9.)
VCR Combo.
SOLUTION: For power on, these products require setting up TV
codes on the remote control. For Sony, use TV code 10000 and
VCR code 20032. For Sharp, use TV code 10093 and VCR code
20048. (See “Controlling Other Components” on page 9.)