GE 24958 用户手册

1...Press.and.hold.the.

SETUP button.until.the.red.

indicator.turns.on,.then.release.the.button.

2...Press.and.release.the.desired.mode.button.

(

TV,.DVD,.etc.),.the.red.indicator.blinks.then.

stays.on.

3...Press.and.release.the.

LEARN button,.the.red.

indicator.blinks.then.stays.on..

4...Press.and.release.the.

Learning Remote button.

that.you.want.to.teach.(e.g..

POWER).

5...Point.both.remotes.facing.each.other.by.ap-

proximately.1.inch.apart.(see.tips.on.page.12).

6...Press.and.hold.the.

Original Remote button.

(e.g..Power).until.the.red.indicator.blinks.once.

and.stays.on..If.there.is.a.learning.problem,.the.

indicator.blinks.for.three.seconds.and.stays.on..

If.this.happens,.repeat.Steps.4.to.6.

7...Repeat.Steps.4-6.for.other.buttons.you.want.to.

learn.

8...Press.and.release.the

SETUP button.when.all.

desired.remote.commands.are.learned..Code.

Learning.is.now.complete.

Learning Commands

Line up your remotes (that you’re learning from)

in front of the learning remote on a hard surface

approx. 1-inch apart.