GE GFK-0804B 用户手册
4
4-30
Micro PLC Programmer’s Guide – April 1994
GFK-0804B
Move Functions
The Micro PLC instruction set includes these Math functions:
Move
The Move function copies 1 word (16 bits) of data to a speci-
fied memory location.
fied memory location.
Block Move
The Block Move function copies a selectable amount of data to
a specified memory location. It copies more than 16 bits at a
time.
a specified memory location. It copies more than 16 bits at a
time.
Indirect Move
The Indirect Move function copies a constant or the content of
register to a variable register location.
register to a variable register location.
Move
The Move function copies 1 word (16 bits) of data to a specified memory location. The
possible choices are:
possible choices are:
Register > Register
Input (I) > Register
Register > Coil (C)
Coil (C) > Register
Register > Output (O)
Input (I) > Register
Register > Coil (C)
Coil (C) > Register
Register > Output (O)
Programming Software Instructions
1.
Select Move (F5)
from the Math/Move function keys.
2.
Enter the number to be moved.
This can be a constant, or the contents of a specified
bit or register memory location. In the example shown, the Move function copies 16
bits located from I001 through I016. Then press the Enter key.
bits located from I001 through I016. Then press the Enter key.
3.
Enter a memory location for the data to be copied to
. The memory type (bit or
register) must be compatible with the data being moved. Press the Enter key. The
software will not let you select an incompatible memory type.
software will not let you select an incompatible memory type.