Clifford G4102X 用户手册

➤

Valet mode

You can prevent your system from automatically activating the Failsafe® Starter

Kill. When the system is in Valet mode, the feature is disabled. The doors

do not automatically lock. This is useful when washing or having the vehicle

serviced.

To enter or exit valet mode with the valet/program switch:

1. Turn the ignition key on and then off.

2. At anytime during the next 10 seconds, press and

release the Valet switch on the control center. The

LED lights constantly if you have entered Valet®

Mode, and goes out if you have exited Valet

Mode.

To enter or exit Valet mode with the remote control:

Press

two times, and then to set the system in or out of Valet Mode.

Repeating the process takes the system out of Valet Mode.

The control center LED come on solid when in Valet Mode and shuts off when

exiting Valet Mode.

➤

Panic Mode

If you are threatened in or near your vehicle, you can attract attention by trig-

gering the system with your remote. This feature is only available if the optional

horn honk is connected.

Press

•

for 2 seconds, to enter Panic Mode. The horn honks and the

parking lights flash for the programmed horn honk duration.

To stop Panic Mode at any time:

•

Press on the remote again.