Konica Minolta VI-700 用户手册
123
Chapter
2
File
Menu
Menu
300
File – Import – Digitizer – Step Scan (When VIVID 300 is Selected)
8
Place the calibration chart on the rotat-
ing stage.
Position the chart with the black line facing the
instrument and place it on the rotating stage
so that both entire side surfaces are observed
in the viewfinder.
instrument and place it on the rotating stage
so that both entire side surfaces are observed
in the viewfinder.
• If “Chart” is not displayed in [Current Angle],
click the left mouse button and select “Chart”
from the pull-down menu that appears.
from the pull-down menu that appears.
M
emo
The calibration chart can be scanned at any angle of the
rotating stage.
rotating stage.
9
Click the [OK] button.
The calibration chart will be scanned.
Note
Make sure that the acquired range image looks like
the good example given below. If it resembles the bad
example, click the [Scan] button again to re-scan the
calibration chart.
the good example given below. If it resembles the bad
example, click the [Scan] button again to re-scan the
calibration chart.
10
Click the [Convert] button.
The [File-Import-Digitizer-Step Scan-Convert]
dialog box will appear.
dialog box will appear.
Good example
Bad example